Engine Oil Pressure Switch
Show/hide table
Illustration 1 | g00380079 |
Engine oil pressure switch |
(1) Pin for electrical connector
(2) Threaded end for installation in the cylinder block
Use 5P-3413 Pipe Sealant on the threads of the engine oil pressure switch during installation.
Tighten the engine oil pressure switch to the following torque: ... 11 N·m (8 lb ft)
The engine oil pressure switch is located on the right side of the engine.
Operating pressure ... 19.3 to 39.3 kPa (2.8 to 5.7 psi)
Caterpillar Information System:
793C Off-Highway Truck Machine Systems Relay Valve (Air Start) - Disassemble
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Engine Oil Pan
65E, 75E, 85E and 95E Agricultural Tractors General Hazard Information
527 Track-Type Skidder Power Train Steering and Brake Control Valve
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Engine Oil Relief Valve
65E, 75E, 85E and 95E Agricultural Tractors Seat Belt Adjustment
533 and 543 Wheel Feller Bunchers Operation
65E, 75E, 85E and 95E Agricultural Tractors Seat Belt
IT14G Integrated Toolcarrier and 914G Wheel Loader Machine Systems Cab - Remove
793C Off-Highway Truck Machine Systems Air Horn - Remove and Install
HH45 Harvester Head, HH55 Harvester Head, HH65 Harvester Head and HH75 Harvester Head Caterpillar Reference Material
793C Off-Highway Truck Machine Systems Check Valve (Air Tank) - Assemble
793C Off-Highway Truck Machine Systems Relay Valve (Air Start) - Assemble
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Engine Oil Pump
3176C and 3196 Engines for Caterpillar Built Machines Basic Engine
793C Off-Highway Truck Machine Systems Solenoid Valve (Air Start) - Remove and Install
65E, 75E, 85E and 95E Agricultural Tractors Crushing Prevention and Cutting Prevention
3406E and 3456 Engines for Caterpillar Built Machines Glossary of Electronic Control Terms
DASA 280 Measuring and Control System Programming Preselections
793C Off-Highway Truck Machine Systems Air Dryer - Remove and Install
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Fan Drive
527 Track-Type Skidder Power Train Steering Clutch and Brake
CP-563D, CS-563D, CS-573D and CS-583D Vibratory Compactors Auxiliary Hydraulic System Auxiliary Hydraulic System
517 Track-Type Skidder Power Train Final Drive