Air Tank Moisture and Sediment - Drain
Show/hide table
 | |
| Illustration 1 | g00341912 |
Show/hide table
 | |
| Illustration 2 | g00344594 |
Show/hide table
 | |
| Illustration 3 | g00344595 |
The primary air tank is located to the right of the operator's compartment.
The secondary air tank is located in the compartment at the rear of the cab.
- Open the drain valves for the air tanks.
- Check for moisture and sediment in the air tanks. Drain the moisture and the sediment from the air tank into a suitable container.
- Close the drain valves for the air tanks.
Caterpillar Information System:
966G Wheel Loader and 972G Wheel Loader Power Train CID 0585 FMI 02 Speed Sensor (No. 1) (Transmission Output) Incorrect Signal - Test
IT14G Integrated Toolcarrier and 914G Wheel Loader Braking System Master Cylinder
784B and 785B Off-Highway Truck/Tractors Frame and Body Support Pads - Clean/Inspect
784B and 785B Off-Highway Truck/Tractors Frame and Body - Inspect
784B and 785B Off-Highway Truck/Tractors Frame - Clean/Inspect
784B and 785B Off-Highway Truck/Tractors Ether Starting Aid Cylinder - Replace
784B and 785B Off-Highway Truck/Tractors Window Wiper - Inspect/Replace
784B and 785B Off-Highway Truck/Tractors Window - Clean
966G Wheel Loader and 972G Wheel Loader Power Train CID 0562 FMI 09 Caterpillar Monitoring System Abnormal Update - Test
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Main Control Valve - Assemble
966G Wheel Loader and 972G Wheel Loader Power Train CID 0444 FMI 06 Magnetic Switch (Start Relay) Current Above Normal - Test
784B and 785B Off-Highway Truck/Tractors Leaving the Machine
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Power Train CID 0617 FMI 03 Magnetic Switch (Air Inlet Heater Relay) Voltage Above Normal - Test
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Power Train CID 0617 FMI 05 Magnetic Switch (Air Inlet Heater Relay) Current Below Normal - Test
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Power Train CID 0617 FMI 06 Magnetic Switch (Air Inlet Heater Relay) Current Above Normal - Test
784B and 785B Off-Highway Truck/Tractors Air Dryer - Check
966G Wheel Loader and 972G Wheel Loader Power Train CID 0621 FMI 03 Push Button Switch (Downshift) Voltage Above Normal - Test
793B Off-Highway Truck Fuel System Primary Filter - Clean
CP-563C and CS-563C Vibratory Compactors Gauges
793C Off-Highway Truck Fuel System Secondary Filter - Replace
966G Wheel Loader and 972G Wheel Loader Power Train CID 0621 FMI 04 Push Button Switch (Downshift) Voltage Below Normal - Test
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Lift Kickout Control - Remove and Install
966G Wheel Loader and 972G Wheel Loader Power Train CID 0631 FMI 03 Modulating Valve (Clutch 1 Solenoid) Voltage Above Normal - Test
966G Wheel Loader and 972G Wheel Loader Power Train CID 0631 FMI 05 Modulating Valve (Clutch 1 Solenoid) Current Below Normal - Test