Leaving the Machine
Show/hide table
 | |
| Illustration 1 | g00341274 |
- Use the steps and the handholds when you get off the machine. Face the machine and use both hands. Make sure that the steps are clear of debris before you dismount.
- Inspect the engine compartment for debris. Clean out any debris and paper in order to avoid a fire.
- Remove all flammable debris from the front bottom guard in order to reduce the fire hazard. Dispose of the debris properly.
- Turn the key for the battery disconnect switch to the OFF position and remove the key. When the machine is not operated for an extended period of one month or more, remove the key for the battery disconnect switch. This will help to prevent a battery short circuit. Removing the key will also help to protect the battery from vandalism and from the current draw that is made by certain components.
- Install all the covers and install all the vandalism protection locks.
Caterpillar Information System:
527 Track-Type Skidder Winching
789B Off-Highway Truck Hydraulic System Brake Oil Overheating Troubleshooting
966G Wheel Loader and 972G Wheel Loader Power Train CID 0444 FMI 05 Magnetic Switch (Start Relay) Current Below Normal - Test
789B Off-Highway Truck Hydraulic System Hoist, Torque Converter, and Brake System Troubleshooting
789B Off-Highway Truck Air System and Brakes General Information
527 Track-Type Skidder Steering on a Steep Downgrade
IT14G Integrated Toolcarrier and 914G Wheel Loader Braking System Gear Pump
527 Track-Type Skidder Normal Steering
784B and 785B Off-Highway Truck/Tractors Starting the Engine
527 Track-Type Skidder Changing Direction and Speed
966G Wheel Loader and 972G Wheel Loader Power Train CID 0444 FMI 03 Magnetic Switch (Start Relay) Voltage Above Normal - Test
784B and 785B Off-Highway Truck/Tractors Mounting and Dismounting
966G Wheel Loader and 972G Wheel Loader Power Train CID 0444 FMI 06 Magnetic Switch (Start Relay) Current Above Normal - Test
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Main Control Valve - Assemble
966G Wheel Loader and 972G Wheel Loader Power Train CID 0562 FMI 09 Caterpillar Monitoring System Abnormal Update - Test
784B and 785B Off-Highway Truck/Tractors Window - Clean
784B and 785B Off-Highway Truck/Tractors Window Wiper - Inspect/Replace
784B and 785B Off-Highway Truck/Tractors Ether Starting Aid Cylinder - Replace
784B and 785B Off-Highway Truck/Tractors Frame - Clean/Inspect
784B and 785B Off-Highway Truck/Tractors Frame and Body - Inspect
784B and 785B Off-Highway Truck/Tractors Frame and Body Support Pads - Clean/Inspect
IT14G Integrated Toolcarrier and 914G Wheel Loader Braking System Master Cylinder
966G Wheel Loader and 972G Wheel Loader Power Train CID 0585 FMI 02 Speed Sensor (No. 1) (Transmission Output) Incorrect Signal - Test
784B and 785B Off-Highway Truck/Tractors Air Tank Moisture and Sediment - Drain