Illustration 1 | g00008291 |
(1) Torque for two plugs ... 80 ± 15 N·m (60 ± 11 lb ft)
(2) Lubricate seals with a thin covering of the lubricant that is being sealed.
(3) 102-7412 Spring
- Test length ... 28 mm (1.1 inch)
- Test force ... 46.0 ± 2.4 N (10.00 ± .54 lb)
- Free length after test ... 48.42 mm (1.906 inch)
- Outside diameter ... 18.2 mm (.72 inch)
- Test force ... 46.0 ± 2.4 N (10.00 ± .54 lb)
(4) Torque for blade lift relief valve ... 35 ± 7 N·m (26 ± 5 lb ft)
Note: Before you install valves (5) and seats (6) into the control valve body, assemble the valves and seats together.
(7) Torque for plug ... 35 ± 7 N·m (26 ± 5 lb ft)
(8) 6E-5153 Spring
- Test length ... 14.0 mm (.55 inch)
- Test force ... 18.0 ± 1.4 N (4.00 ± .32 lb)
- Free length after test ... 18.4 mm (.72 inch)
- Outside diameter ... 7.2 mm (.28 inch)
- Test force ... 18.0 ± 1.4 N (4.00 ± .32 lb)
(9) Lubricate seals with a thin covering of the lubricant that is being sealed.
(10) 9J-0403 Spring
- Quantity ... 2
- Test length ... 18.7 mm (.74 inch)
- Test force ... 12.9 ± 1.0 N (2.90 ± .23 lb)
- Free length after test ... 25.1 mm (.99 inch)
- Outside diameter ... 10.4 mm (.41 inch)
- Test length ... 18.7 mm (.74 inch)
(11) 111-8233 Spring
- Test length ... 15.5 mm (.61 inch)
- Test force ... 13.5 ± 0.8 N (3.03 ± .18 lb)
- Free length after test ... 25.6 mm (1.01 inch)
- Outside diameter ... 15.0 mm (.59 inch)
- Test force ... 13.5 ± 0.8 N (3.03 ± .18 lb)
Gently seat the ball (12) into the valve body at assembly.
(13) 6E-3007 Spring
- Test length ... 8.6 mm (.34 inch)
- Test force ... 0.234 ± 0.024 N (.053 ± .005 lb)
- Free length after test ... 10.0 mm (.39 inch)
- Outside diameter ... 4.6 mm (.18 inch)
- Test force ... 0.234 ± 0.024 N (.053 ± .005 lb)
(14) Torque for lever ... 25 ± 6 N·m (18 ± 4 lb ft)
Illustration 2 | g00008293 |
View A |
(15) Lubricate seals with a thin covering of the lubricant that is being sealed.
(16) Lubricate rings with a thin covering of the lubricant that is being sealed.