Circle
Show/hide table
 | |
| Illustration 1 | g00040764 |
(1) Tighten the nuts to 0.00 mm (.000 inch) clearance. Back off one slot on the nut and install the cotter.
As required, use 2K-0419 Washer (4) to provide a sliding fit. The maximum clearance between bracket (3) and beam (2) is 1.8 mm (.07 inch).
(4) Thickness of washer ... 1.65 mm (.065 inch)
Caterpillar Information System:
120H and 135H Motor Graders Hydraulic and Steering System Blade Lift
12H, 140H and 160H Motor Graders Hydraulic and Steering System Circle
12H, 140H and 160H Motor Graders Hydraulic and Steering System Blade Lift
584 and 584HD Forwarders Decommissioning and Disposal
834B and 836 Landfill Compactor Engine Shutdown Control
446B Backhoe Loader Warranty Information
12H, 140H and 160H Motor Graders Hydraulic and Steering System Blade Lift Control Valve
12H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System Valve and Linkage Group
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Seat Belt Adjustment
561M Pipelayer Seat Belt
834B and 836 Landfill Compactor Power Guard Control
515 Wheel Skidder and 525 Wheel Skidder Additional Reference Material
120H and 135H Motor Graders Hydraulic and Steering System Drawbar
854G Wheel Dozer Engine Water Pump - Inspect
631E Series II Wheel Tractor-Scrapers Aftermarket Oil Additives
120H Motor Grader Hydraulic and Steering System Ripper Cylinder
120H Motor Grader Hydraulic and Steering System Drawbar
12H, 140H and 160H Motor Graders Hydraulic and Steering System Snow Plow/Bulldozer Relief Valve
12H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System Control Valve (Snow Plow/Dozer Lift)
824G , 825G and 826G Landfill Compactor Mounting and Dismounting
834B and 836 Landfill Compactor Cooling System Water Temperature Regulator - Replace
584 and 584HD Forwarders Oil Filter - Inspect
844 Wheel Dozer Battery, Battery Cable or Battery Disconnect Switch - Replace
988G Wheel Loader Bucket Cutting Edges - Inspect/Replace