Reaction Arm Bearings Fail Caterpillar


Reaction Arm Bearings Fail

Usage:

AGRICULTURAL TRACTORSCHALLENGER 35 (8DN, 8RD, ADK, 3HS, 1TJ),
CHALLENGER 45 (1DR, ABF, 3BK, 4KW, 4YL),
CHALLENGER 55 (7DM, 6NN, AEN, 7TZ, 3SM) AGRICULTURAL TRACTORS

Problem:

There have been reports of reaction arm bearing failures. Root cause diagnosis has been difficult, as the bearings are usually completely destroyed.

Solution:

The most likely cause of failure is the lack of lubrication of the bearing during operation. Oil may leak out of the cavity while the machine is not in use for an extended period of time. Until a definite root cause is determined, continue to use the 1000 hour maintenance check. Refer to the "Maintenance Interval Schedule" that is outlined in the operation and maintenance manual. In applications where less than 1000 hours are logged during a season, check the oil level before using the Challenger agricultural tractor for spring or fall field work.

COPYRIGHT 2000 CATERPILLAR ALL RIGHTS RESERVED

Caterpillar Information System:

The Bolts In Some 106-3722 Suspension Cylinder Groups May Need To Be Tightened The Bolts In Some 106-3722 Suspension Cylinder Groups May Need To Be Tightened
PS-150/200B Canopies May Develop Stress Cracks PS-150/200B Canopies May Develop Stress Cracks
Proper Placement Of Hydraulic Jacks When Raising The Rear End Of Pneumatic Compactors Proper Placement Of Hydraulic Jacks When Raising The Rear End Of Pneumatic Compactors
Certain CS/CP-563C Compactors May Be Equipped With 12-Volt Electrical Relays Instead of 24-Volt Electrical Relays Certain CS/CP-563C Compactors May Be Equipped With 12-Volt Electrical Relays Instead of 24-Volt Electrical Relays
Probable Causes For Powering Down Problems Probable Causes For Powering Down Problems
The Premium Software Update Version 1.1 (Literature # YEXN0914) Will Conflict With Caterpillar Electronic Technician The Premium Software Update Version 1.1 (Literature # YEXN0914) Will Conflict With Caterpillar Electronic Technician
Complete Software Information Will Soon Be Available Complete Software Information Will Soon Be Available
Newly Updated EDC0630.Bin And ETC0550.Bin Flash Files Are Corrupt Newly Updated EDC0630.Bin And ETC0550.Bin Flash Files Are Corrupt
Remote Air Conditioner Condenser Repair Remote Air Conditioner Condenser Repair
Additional Counterweight For 236 And 246 Skid Steer Loaders Additional Counterweight For 236 And 246 Skid Steer Loaders
VIMS-PC Version 2.4 Will Not Open After Installation Of Electronic Technician Version 3.0 VIMS-PC Version 2.4 Will Not Open After Installation Of Electronic Technician Version 3.0
Bracket For Wheel Chocks Requires Welding At Installation Bracket For Wheel Chocks Requires Welding At Installation
Engine Vibration Due To Dirt In Fan Hub Engine Vibration Due To Dirt In Fan Hub
Battery Discharge During Machine Storage Battery Discharge During Machine Storage
Reaction Arm Bearings Fail Reaction Arm Bearings Fail
155-6581 Fuel Level Sender May Malfunction 155-6581 Fuel Level Sender May Malfunction
New Adjustment Procedure When Installing The New 170-9002 Front Suspension Ball Joints In The PF/PS-300B Pneumatic Compactors New Adjustment Procedure When Installing The New 170-9002 Front Suspension Ball Joints In The PF/PS-300B Pneumatic Compactors
Service Meter Hour Limitation On Service Letter, PI3335 Service Meter Hour Limitation On Service Letter, PI3335
Mechanical Failures Of Cat ID Mechanical Failures Of Cat ID
Rubber Chunking From Drive Wheel Assemblies Rubber Chunking From Drive Wheel Assemblies
FEEDER SYSTEM DIAGNOSIS ON ASPHALT PAVERS FEEDER SYSTEM DIAGNOSIS ON ASPHALT PAVERS
137-9822 Sonic Sensor Field Test 137-9822 Sonic Sensor Field Test
Right-Hand Engine Side Guard Removal Right-Hand Engine Side Guard Removal
Elevated Copper And Iron Levels Found While Performing SOS Samples On Transmissions Elevated Copper And Iron Levels Found While Performing SOS Samples On Transmissions
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.