After Failure Only
| PRODUCT SUPPORT PROGRAM FOR INSTALLING THE 3918172/">391-8172 PLUG ON CERTAIN 415F2, 416F2, 420F2, 422F2, 428F2, 430F2, AND 432F2 BACKHOE LOADERS |
3064 3030
|
PS53248 |
NOTE: |
Caterpillar’s obligations under this Service Letter are subject to, and shall not apply in contravention of, the laws, rules, regulations, directives, ordinances, orders, or statutes of the United States, or of any other applicable jurisdiction, without recourse or liability with respect to Caterpillar.
|
NOTE: |
This Program can only be administered after a failure occurs.
The decision whether to apply the Program is made by the dealer. When reporting the repair, use "PS53248" as the Part Number
and "7755" as the Group Number. Use "96" as the Warranty Claim Description Code and use "Z" as the SIMS Description Code. |
NOTE: |
The information supplied in this service letter may not be valid after the termination date of this program.
Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst. |
The existing non-metallic plug can leak on certain 415F2, 416F2, 420F2, 422F2, 428F2, 430F2, and 432F2 Backhoe Loaders. If the existing plug is not replaced, it can leak transmission fluid. |
Qty |
Part Number |
Description |
1 |
3918172 |
PLUG |
In order to allow equitable parts availability to all participating dealers, please limit your initial parts order to not exceed 1% of dealership population. This is an initial order recommendation only, and the ultimate responsibility for ordering the total number of parts needed to satisfy the program lies with the dealer.
|
Replace the existing non-metallic factory installed plug with a new 3918172/">391-8172 Plug. Install a small bead of Loctite 638 on the plug before installation. The plug is located on the case of the transmission on the machine right hand side. Refer to Image1 for the plug location. |
Product smu/age whichever comes first |
Caterpillar |
Dealer Suggested |
Customer Suggested |
Parts % |
Labor Hrs% |
Parts % |
Labor Hrs% |
Parts % |
Labor Hrs% |
0-5000 hrs, 0-60 mo |
100.0% |
100.0% |
0.0% |
0.0% |
0.0% |
0.0% |
NOTE: This is a 1.0-hour job
|
|
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling. |
|
|
|