PRODUCT SUPPORT PROGRAM FOR REPLACING THE CLEANER FINGERS ON CERTAIN 826H LANDFILL COMPACTORS, EQUIPPED WITH CLEANER FINGERS
Usage:
TEBE0601-01
Show/hide table
| 29Apr2014 |
| (Revised 05Sep2014) |
U-237
A-182
D-218
O-207
Show/hide table
| After Failure Only | PRODUCT SUPPORT PROGRAM FOR REPLACING THE CLEANER FINGERS ON CERTAIN 826H LANDFILL COMPACTORS, EQUIPPED WITH CLEANER FINGERS |
|
| 7160 | PS52656 |
|
Show/hide table
| NOTE: | Caterpillar’s obligations under this Service Letter are subject to, and shall not apply in contravention of, the laws, rules, regulations, directives, ordinances, orders, or statutes of the United States, or of any other applicable jurisdiction, without recourse or liability with respect to Caterpillar. |
| NOTE: | This Program can only be administered after a failure occurs. The decision whether to apply the Program is made by the dealer. When reporting the repair, use "PS52656" as the Part Number and "7755" as the Group Number. Use "96" as the Warranty Claim Description Code and use "Z" as the SIMS Description Code. |
Show/hide table
Show/hide table
| NOTE: | The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst. |
Show/hide table
Show/hide table
| NOTE: | This Revised Service Letter replaces the 29Apr2014 Service Letter. Changes have been made to correct the Profit Center. |
Show/hide table
TERMINATION DATE |
| 30Apr2016 |
PROBLEM
Show/hide table
| The existing cleaner fingers can become loose or fall off on certain 826H Landfill Compactors. The retaining bolt for the cleaner finger can loose clamp load and become loose. The bolt then will back out until the bolt falls off and the cleaner finger then falls off. |
AFFECTED PRODUCT
Show/hide table
| Model | Identification Number |
| 826H | AWF00607-00820, 75001-75002, 78001 |
PARTS NEEDED
Show/hide table
Qty |
Part Number | Description |
| 32 | 8T1482 | WASHER-HARD |
| 32 | 8T5397 | BOLT |
| 16 | 4495450 | BAR GP-CLNR CMPT |
| In order to allow equitable parts availability to all participating dealers, please limit your initial parts order to not exceed 1% of dealership population. This is an initial order recommendation only, and the ultimate responsibility for ordering the total number of parts needed to satisfy the program lies with the dealer. |
||
ACTION REQUIRED
Show/hide table
| Replace cleaner finger assembly with a new 449-5450 Cleaner Bar Group. |
Show/hide table
SERVICE CLAIM ALLOWANCES
Show/hide table
0-12 mo |
||||||
13-36 mo |
||||||
37-48 mo |
||||||
Show/hide table
| NOTE: This is a 4.0-hour job | ||||||
Show/hide table
PARTS DISPOSITION
Show/hide table
| Handle the parts in accordance with your Warranty Bulletin on warranty parts handling. |
Caterpillar Information System:
PRODUCT SUPPORT PROGRAM FOR INSPECTING AND POSSIBLY REPLACING THE TRANSMISSION HARNESS ON CERTAIN 793F OFF-HIGHWAY TRUCKS PRODUCT SUPPORT PROGRAM FOR INSPECTING AND POSSIBLY REPLACING THE TRANSMISSION HARNESS ON CERTAIN 793F OFF-HIGHWAY TRUCKS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ENGINE DAMPER MOUNTING BOLTS ON CERTAIN 797F OFF-HIGHWAY TRUCKS PRODUCT SUPPORT PROGRAM FOR REPLACING THE ENGINE DAMPER MOUNTING BOLTS ON CERTAIN 797F OFF-HIGHWAY TRUCKS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REPLACING THE 3702561 PLATE ASSEMBLY IN THE STEERING CONTROL GROUP ON CERTAIN R1700G, R2900G, AND R3000H UNDERGROUND LOAD HAUL DUMP MACHINES PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REPLACING THE 3702561 PLATE ASSEMBLY IN THE STEERING CONTROL GROUP ON CERTAIN R1700G, R2900G, AND R3000H UNDERGROUND LOAD HAUL DUMP MACHINES
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE DRIVE MOTOR GROUP ON CERTAIN 246D AND 262D SKID STEER LOADERS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE DRIVE MOTOR GROUP ON CERTAIN 246D AND 262D SKID STEER LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TURBOCHARGER SUPPORTS ON CERTAIN 797, 797B, AND 797F OFF-HIGHWAY TRUCKS PRODUCT SUPPORT PROGRAM FOR REPLACING THE TURBOCHARGER SUPPORTS ON CERTAIN 797, 797B, AND 797F OFF-HIGHWAY TRUCKS
PRODUCT SUPPORT PROGRAM FOR NEW CLAMP ON THE AFTER COOLER TUBE ON 24M MOTOR GRADERS PRODUCT SUPPORT PROGRAM FOR NEW CLAMP ON THE AFTER COOLER TUBE ON 24M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR INSTALLING AIR CONDITIONING COMPRESSOR MOUNTING BRACKETS ON CERTAIN R2900G AND R3000H UNDERGROUND LOAD HAUL DUMP MACHINES PRODUCT SUPPORT PROGRAM FOR INSTALLING AIR CONDITIONING COMPRESSOR MOUNTING BRACKETS ON CERTAIN R2900G AND R3000H UNDERGROUND LOAD HAUL DUMP MACHINES
PRODUCT SUPPORT PROGRAM FOR REWORKING THE STEERING ACCUMULATOR CLAMPS ON CERTAIN 797F OFF-HIGHWAY TRUCKS PRODUCT SUPPORT PROGRAM FOR REWORKING THE STEERING ACCUMULATOR CLAMPS ON CERTAIN 797F OFF-HIGHWAY TRUCKS
PRODUCT SUPPORT PROGRAM FOR REPLACEMENT OF THE ENGINE MOUNTING NUT ON CERTAIN 559C, 579C, 2384C, AND 2484C KNUCKLEBOOM LOADERS PRODUCT SUPPORT PROGRAM FOR REPLACEMENT OF THE ENGINE MOUNTING NUT ON CERTAIN 559C, 579C, 2384C, AND 2484C KNUCKLEBOOM LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE CYLINDER HEAD ON CERTAIN R1300G LOAD HAUL DUMP MACHINES PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE CYLINDER HEAD ON CERTAIN R1300G LOAD HAUL DUMP MACHINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE AIR LINES GROUP ON CERTAIN 797F OFF-HIGHWAY TRUCKS EQUIPPED WITH A HIGH ALTITUDE ENGINE ARRANGEMENT PRODUCT SUPPORT PROGRAM FOR REPLACING THE AIR LINES GROUP ON CERTAIN 797F OFF-HIGHWAY TRUCKS EQUIPPED WITH A HIGH ALTITUDE ENGINE ARRANGEMENT
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE AXLE MOTOR ON CERTAIN CS54B, CP54B, CS64B, AND CS54B OEM SOIL COMPACTORS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE AXLE MOTOR ON CERTAIN CS54B, CP54B, CS64B, AND CS54B OEM SOIL COMPACTORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 177-6925 EXHAUST ELBOW ON CERTAIN 797F OFF-HIGHWAY TRUCKS PRODUCT SUPPORT PROGRAM FOR REPLACING THE 177-6925 EXHAUST ELBOW ON CERTAIN 797F OFF-HIGHWAY TRUCKS
PRODUCT SUPPORT PROGRAM FOR UPDATING THE ENGINE SOFTWARE ON CERTAIN 793F, 795F, AND 797F OFF HIGHWAY TRUCKS PRODUCT SUPPORT PROGRAM FOR UPDATING THE ENGINE SOFTWARE ON CERTAIN 793F, 795F, AND 797F OFF HIGHWAY TRUCKS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 272-3153 HOSES WITHIN THE 355-9984 TURBOCHARGER OIL LINES GROUP ON CERTAIN 777G OFF-HIGHWAY TRUCKS PRODUCT SUPPORT PROGRAM FOR REPLACING THE 272-3153 HOSES WITHIN THE 355-9984 TURBOCHARGER OIL LINES GROUP ON CERTAIN 777G OFF-HIGHWAY TRUCKS
PRODUCT IMPROVEMENT PROGRAM FOR PERFORMING ADDITIONAL UPDATES ON CERTAIN 770G AND 772G OFF-HIGHWAY TRUCKS - MULTIPLE REPAIRS PRODUCT IMPROVEMENT PROGRAM FOR PERFORMING ADDITIONAL UPDATES ON CERTAIN 770G AND 772G OFF-HIGHWAY TRUCKS - MULTIPLE REPAIRS
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING BRACKET AS TO SUPPORT CABLE GP-POWER TRAIN ON CERTAIN 795F AC OFF-HIGHWAY TRUCKS PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING BRACKET AS TO SUPPORT CABLE GP-POWER TRAIN ON CERTAIN 795F AC OFF-HIGHWAY TRUCKS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING THE 339-9363 MULTIFUNCTION CONTROL LEVER IN DEALER PARTS STOCK PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING THE 339-9363 MULTIFUNCTION CONTROL LEVER IN DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REROUTING THE LUBE LINE TO THE REAR GEAR ENGINE HOUSING ON 24M MOTOR GRADERS PRODUCT IMPROVEMENT PROGRAM FOR REROUTING THE LUBE LINE TO THE REAR GEAR ENGINE HOUSING ON 24M MOTOR GRADERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE PLATE ASSEMBLY IN THE WATER MANIFOLD SHIELD GROUP ON CERTAIN 793, 793B, 793C, AND 793D OFF-HIGHWAY TRUCKS EQUIPPED WITH A 3516B HD ENGINE PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE PLATE ASSEMBLY IN THE WATER MANIFOLD SHIELD GROUP ON CERTAIN 793, 793B, 793C, AND 793D OFF-HIGHWAY TRUCKS EQUIPPED WITH A 3516B HD ENGINE
PRODUCT SUPPORT PROGRAM FOR UPDATING THE ENGINE SOFTWARE AND ADDING A INTAKE MANIFOLD ABSOLUTE PRESSURE (IMAP) SENSOR TO THE RIGHT HAND INTAKE MANIFOLD ON CERTAIN 773G, 775G, AND 777G OFF-HIGHWAY TRUCKS PRODUCT SUPPORT PROGRAM FOR UPDATING THE ENGINE SOFTWARE AND ADDING A INTAKE MANIFOLD ABSOLUTE PRESSURE (IMAP) SENSOR TO THE RIGHT HAND INTAKE MANIFOLD ON CERTAIN 773G, 775G, AND 777G OFF-HIGHWAY TRUCKS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE BODY ON CERTAIN 740 AND 740B ARTICULATED TRUCKS TO IMPROVE CLEARANCE WITH THE BRAKE COOLING MANIFOLD ON THE REAR FRAME PRODUCT SUPPORT PROGRAM FOR REWORKING THE BODY ON CERTAIN 740 AND 740B ARTICULATED TRUCKS TO IMPROVE CLEARANCE WITH THE BRAKE COOLING MANIFOLD ON THE REAR FRAME
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE INCORRECT ROPS/FOPS FILM WITH THE CORRECT ONE ON CERTAIN 12M MOTOR GRADERS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE INCORRECT ROPS/FOPS FILM WITH THE CORRECT ONE ON CERTAIN 12M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE AUTOLUBE CARTRIDGE VALVE ON CERTAIN 777F AND 777G OFF-HIGHWAY TRUCKS PRODUCT SUPPORT PROGRAM FOR REPLACING THE AUTOLUBE CARTRIDGE VALVE ON CERTAIN 777F AND 777G OFF-HIGHWAY TRUCKS