1999/06/21 Caterpillar


New Oil Pump Group Used {1304}

Usage:


D8R (7XM, 9EM) Track-Type Tractors;
375L (9WL, 1JM) Excavators;
5080 (8SL, 6SK) Front Shovels;
583R (2XS) Pipelayers;
627F (1DL),
621F (4SK) Scrapers;
980G (2KR) Wheel Loaders;
771C (6JR) Off-Highway Trucks D350E (9LR734-Up),
D400E (2YR1279-Up) Articulated Trucks

SUPPLEMENT: AUGUST 2, 1999

Service Magazine SEPD0477, Article 5, Page 5-6, June 21, 1999; "New Oil Pump Group Used".

Disregard the above article and see Service Magazine SEPD0483, Article 11, Page 13 with the same title.

--------------- END SUPPLEMENT ---------------

Description of Change: New oil pump groups utilizing steel idler and drive gears are now used on the 3406 Engines in the above machines. The new parts will provide a more robust oil pump with longer life characteristics.

Adaptable To: The chart identifies the new oil pump groups and gear assemblies and the former groups used on the engines in the above machines.

Caterpillar Information System:

1999/06/21 New Components Provide Improved Sealing In Engine Exhaust Manifold Groups {1059}
1999/06/14 New Fuel Nozzles Resist Adapter Cracking And Leaking {1254}
1999/06/14 Recommended Lubricant For Cab Door Locks And Hood Locks {7251,7273,7308}
1999/06/14 Dimensions For Articulated Hitches, Lift Arms, Front And Rear Levers, And Oscillating Rear Axle Assemblies Is Now Available In A New Special Instruction {3260,3268,6116,6118,6119,6125,6126,6127,7057,7069,7100}
1999/06/14 New Door Gas Spring Has Improved Service Life {7308}
1999/06/14 New Fender Available {7252}
1999/06/14 Service Installation Of 165-7948 Check Valve {4304}
1999/06/14 New Special Instruction For 793 Off-Highway Truck Front And Rear Wheel Adapter Kit Installation Available {4200,4200}
1999/06/14 Chassis And Cab Harnesses Must Be Replaced As A Set {3168,3030}
1999/06/14 Correction To Service Manual Module SEBU6757; Operation & Maintenance Manual {0374,0375,1105}
1999/06/14 Suggested Ways To Increase 3500 Unit Injector Service Life {1290}
1999/06/14 Rear Window Latch Improved {7310}
1999/06/21 Correction To Electronic Implement Control System Manual, SENR5891-02; "Normal Operation" {0374,5000,5700}
1999/06/21 Installation Of The Brake Piston {4250}
1999/06/21 Improved Bonding For Longitudinal Stability Indicator Strain Sensor {7856}
1999/06/21 Proper Usage For The Steer Assist Switch {4129,1400}
1999/06/21 Drain Water And Sediment From The Fuel Tank Daily {1273}
1999/06/21 Be Sure The Cylinder Head Bore For The Unit Injector Is Clean When the Unit Injector Is Replaced {1290}
1999/06/21 Methods Of Providing Feedback On Diagnostic Information {7569}
1999/06/28 Fender Mud Flaps Available {7252,4220}
1999/06/28 Tension Cylinder Pin Now Includes Spacers {4197}
1999/06/28 Installation Of Hydraulic Motor Case Drain Line {6129,5057,5051}
1999/06/28 New Pressure Switch Assembly For Engine Oil Improves Reliability {7455,1318}
1999/06/28 Splined Pins For Backhoe Loaders {6506,6502}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.