New 152-8256 (115V) And 154-4853 (220V) Air Conditioning Refrigerant Recovery, Recycling, And Manual Recharging Station For R134A Refrigerant {7320,1809}
Usage:
All Models with Air Conditioning
Warranty Category: M
Features/Benefits
-
- * Combines simplicity of a recovery and recycling station with economy of a manual charging station
- * Learning to operate is quick and easy (comes with instructional videotape for quick start)
- * Requires only one hook-up to machine
- * Functions controlled by four-way manifold conveniently located above control panel
- * Refrigerant recovered into and charged out of an on-board 12 pound tank
- * All refrigerant passes through a filter-drier as it is recovered (makes it ready for immediate reuse)
- * During evacuation, refrigerant is automatically recycled and excess air is purged from tank
- * Sight glass on back shows amount of refrigerant in tank and is used like a charging cylinder for recharging
- * Control panel lights show when recovery and recycling are in process
- * Overfill protection light comes on when tank is full
- * Moisture indicator changes color when refrigerant is ready to be reused
- * Calibrated oil bottle measures the amount of system oil which must be replaced
- * Unit design certified by UL to meet SAE J-1990
- * 154-4853 meets CE requirements (Operator's manual for 154-4853 available in French; video available in NTSC format)
- * Combines simplicity of a recovery and recycling station with economy of a manual charging station
Specifications/Technical Information
- Voltage 152-8256 - 115V, 60 Hz
- Voltage 154-4853 - 220 to 240V, 50/60 Hz (meets CE requirements)
- Operating temperature range - 11 to 49°C (50 to 120°F)
- Recovery rate - 0.2 kg/min (1/2 lb/min)
- Recycling rate flow rate - 0.4 kg/min (1 lb/min)
- Pump free air displacement - 142 L/m (6 CFM)
- Dimensions (H x W x D) - 114 x 56 x 71 cm (45 x 22 x 28 in)
- Weight - 74.8 kg (165 lbs)
- Voltage 154-4853 - 220 to 240V, 50/60 Hz (meets CE requirements)
Air Conditioning Refrigerant Recovery, Recycling, and Manual Recharging Station
Service Parts
Caterpillar Information System:
1999/03/08 New 150-7762 And 150-7745 (Trailer Mounted) Hot Water Pressure Washers For Cleaning Large Components {0680}
1999/03/08 Use 138-8447 Aerosol Rust Preventative As A Corrosion Inhibitor {0645}
1999/03/08 Use 170-9227 Reamer Shims To Aid In Reaming Engine Injector Sleeves {1254}
1999/03/08 Use 157-3719 Spanner For Removing And Installing Bosch Fuel Pumps {1251}
1999/03/08 Use 151-7537 Adapter Bracket Assembly And 150-3978 Lifting Bracket Assembly As Pod Removal And Installation Tool {6605}
1999/03/08 New Muffler Reduces Cab Noise {1062}
1999/03/08 New Steering Column Bearing Kit Available For Off-Highway Trucks {4310}
1999/03/08 Improved Exhaust Tubes Now Used On Off-Highway Trucks {1061}
1999/03/08 Use FT2593 Spanner Wrench To Rotate Concentric Pin To Align Pipelayer Frames {7052}
1999/03/08 New Basic Fuel Transfer Pump Group Includes New Outer Lip Type Seal {1256}
1999/03/08 Supplement To Add Fill Instructions On All Wheel Drive Pump In OMM Manual {3203}
1999/03/08 Supplement To Add Fill Instructions On All Wheel Drive Pump In D&A Manual {3203}
1999/03/15 Improved Machine Performance Panel Has Better Visibility And Changes Factory Defaults {7490}
1999/03/15 New Fuel Level Sender Increases Reliability {7481,7483}
1999/03/15 Special Instruction, SEHS9960, Available For Procedure To Install Three-Point Hitch With Draft Control And Special Instruction, REHS0426, Available For Procedure To Install Draft Control For Use With Aftermarket Three-Point Hitches {7120}
1999/03/15 New Tachometer Signal Generator Improves Reliability {7487}
1999/03/15 New Diaphragm And Cap Available For Certain Front Brake Oil Cooler Diverter Valves {5737}
1999/03/15 Additional Brake Studs Are Required To Increase Brake Pressure On Certain Off-Highway Trucks {4061,4267}
1999/03/15 Blocks Added To Turbocharger Groups To Prevent Bearing Housing Rotation In Low Pressure Turbochargers {1052}
1999/03/15 New Fuel Priming Pump Assembly Used {1258}
1999/03/15 New Camshaft Cover Seal, Crankshaft Cover Seal, And Valve Cover Seal Help Prevent Oil Leaks {1107,1150,1200}
1999/03/15 Supplement To Correct Final Drive Torque Values {4092,4055}
1999/03/15 New Bolts Available For Rear Axles In High Load Applications {3260,3278}
1999/03/15 Correction To SENR6765 Hub Bolt Torque {5062,5070}