Supplement To Add Fill Instructions On All Wheel Drive Pump In OMM Manual {3203}
Usage:
143H (1AL),
163H (5AK) Motor Graders
Reference: SEBU7063 Operations and Maintenance Manual; 143H & 163H Motor Graders; Page 125; This manual is part of SENR9180 Service Manual.
The following instructions detailing the fluid fill procedure should be added Before the All Wheel Drive Oil Filter - Replace Section:
All Wheel Drive Motor Oil Fill
To fill motor, position bleed screw, which is located between two of the 16 mounting bolts on the outside of the motor, to the twelve o'clock position. Loosen the bleed screw two turns. Start the engine, leaving the AWD system turned OFF. Run engine until oil runs out of bleed screw. Tighten bleed screw.
Caterpillar Information System:
1999/03/08 Supplement To Add Fill Instructions On All Wheel Drive Pump In D&A Manual {3203}
1999/03/08 New Seal Installers For Mid-Rollers And Idlers {4159,4180}
1999/03/08 Use 155-1557 Gauge For Scraper Adjustment On Cast Steel Drive Wheels {4199,0766}
1999/03/08 Software Improvements {7620}
1999/03/01 New Tie-Down Available For Asphalt Paver{6600,6100,6300}
1999/03/01 New Water Pumps With Improved Resistance To Shock Loads Used{1361}
1999/03/01 New Flywheel Housing Gasket For 3406 Machine Engines{1157}
1999/03/01 Improved Brake Switch Now Used{4262,1408}
1999/03/01 Supplement To Correct Manual Modulation Pedal Adjustment{3059,3071}
1999/03/01 Special Instruction, REHS0103-01, Available For Procedure For Dynamometer Test For Power Take-Off{3107}
1999/03/01 Fan Pulley/Adapter Changes Summarized{1356,1384,1359}
1999/03/01 Stronger Floatpin Design Available{5102,7120}
1999/03/08 New Basic Fuel Transfer Pump Group Includes New Outer Lip Type Seal {1256}
1999/03/08 Use FT2593 Spanner Wrench To Rotate Concentric Pin To Align Pipelayer Frames {7052}
1999/03/08 Improved Exhaust Tubes Now Used On Off-Highway Trucks {1061}
1999/03/08 New Steering Column Bearing Kit Available For Off-Highway Trucks {4310}
1999/03/08 New Muffler Reduces Cab Noise {1062}
1999/03/08 Use 151-7537 Adapter Bracket Assembly And 150-3978 Lifting Bracket Assembly As Pod Removal And Installation Tool {6605}
1999/03/08 Use 157-3719 Spanner For Removing And Installing Bosch Fuel Pumps {1251}
1999/03/08 Use 170-9227 Reamer Shims To Aid In Reaming Engine Injector Sleeves {1254}
1999/03/08 Use 138-8447 Aerosol Rust Preventative As A Corrosion Inhibitor {0645}
1999/03/08 New 150-7762 And 150-7745 (Trailer Mounted) Hot Water Pressure Washers For Cleaning Large Components {0680}
1999/03/08 New 152-8256 (115V) And 154-4853 (220V) Air Conditioning Refrigerant Recovery, Recycling, And Manual Recharging Station For R134A Refrigerant {7320,1809}
1999/03/15 Improved Machine Performance Panel Has Better Visibility And Changes Factory Defaults {7490}