1999/03/08 Caterpillar

Use 151-7537 Adapter Bracket Assembly And 150-3978 Lifting Bracket Assembly As Pod Removal And Installation Tool {6605}

Usage:

CP-533C (3XN, 3YN),
CS-533C (2WN, 2XN),
CP-563C (5JN, 5KN),
CS-563C (4KN, 4LN),
CS-583C (7MN, 7NN) Vibratory Compactors

Warranty Category: G

Features/Benefits

* Used to safely remove and install compactor pods

Lifting Bracket

* Uses different adapter plates for various applications

* Adjustable center of gravity

Adapter Plate

* Heat treated for added strength and durability

* Fits intricate profile of pods

* Locking pads secure pod to adapter

Specifications/Technical Information

Lifting Bracket

Maximum capacity - 907 kg (2000 lbs)

Height - 1014 mm (40.0 in)

Maximum depth - 1089 mm (43.0 in)

Minimum depth (without adapters) - 820 mm (32.0 in)

Adjustable center of gravity - 197.0 mm (7.75 in) to 1089 mm (43.0 in) inside clearance

Adapter

Overall dimensions - 500 x 630 x 229 mm (20.0 x 25.0 x 9.0 in)

(1) 150-3978 Lifting Bracket Assembly

(2) 151-7537 Adapter Bracket Assembly

Reference

Service Manual Module; KENR7009; Machine System Disassembly and Assembly

Caterpillar Information System:

1999/03/08 New Muffler Reduces Cab Noise {1062}

1999/03/08 New Steering Column Bearing Kit Available For Off-Highway Trucks {4310}

1999/03/08 Improved Exhaust Tubes Now Used On Off-Highway Trucks {1061}

1999/03/08 Use FT2593 Spanner Wrench To Rotate Concentric Pin To Align Pipelayer Frames {7052}

1999/03/08 New Basic Fuel Transfer Pump Group Includes New Outer Lip Type Seal {1256}

1999/03/08 Supplement To Add Fill Instructions On All Wheel Drive Pump In OMM Manual {3203}

1999/03/08 Supplement To Add Fill Instructions On All Wheel Drive Pump In D&A Manual {3203}

1999/03/08 New Seal Installers For Mid-Rollers And Idlers {4159,4180}

1999/03/08 Use 155-1557 Gauge For Scraper Adjustment On Cast Steel Drive Wheels {4199,0766}

1999/03/08 Software Improvements {7620}

1999/03/01 New Tie-Down Available For Asphalt Paver{6600,6100,6300}

1999/03/01 New Water Pumps With Improved Resistance To Shock Loads Used{1361}

1999/03/08 Use 157-3719 Spanner For Removing And Installing Bosch Fuel Pumps {1251}

1999/03/08 Use 170-9227 Reamer Shims To Aid In Reaming Engine Injector Sleeves {1254}

1999/03/08 Use 138-8447 Aerosol Rust Preventative As A Corrosion Inhibitor {0645}

1999/03/08 New 150-7762 And 150-7745 (Trailer Mounted) Hot Water Pressure Washers For Cleaning Large Components {0680}

1999/03/08 New 152-8256 (115V) And 154-4853 (220V) Air Conditioning Refrigerant Recovery, Recycling, And Manual Recharging Station For R134A Refrigerant {7320,1809}

1999/03/15 Improved Machine Performance Panel Has Better Visibility And Changes Factory Defaults {7490}

1999/03/15 New Fuel Level Sender Increases Reliability {7481,7483}

1999/03/15 Special Instruction, SEHS9960, Available For Procedure To Install Three-Point Hitch With Draft Control And Special Instruction, REHS0426, Available For Procedure To Install Draft Control For Use With Aftermarket Three-Point Hitches {7120}

1999/03/15 New Tachometer Signal Generator Improves Reliability {7487}

1999/03/15 New Diaphragm And Cap Available For Certain Front Brake Oil Cooler Diverter Valves {5737}

1999/03/15 Additional Brake Studs Are Required To Increase Brake Pressure On Certain Off-Highway Trucks {4061,4267}

1999/03/15 Blocks Added To Turbocharger Groups To Prevent Bearing Housing Rotation In Low Pressure Turbochargers {1052}