1999/03/01 Caterpillar


Supplement To Correct Manual Modulation Pedal Adjustment{3059,3071}

Usage:


14H (7WJ),
16H (6ZJ) Motor Graders

Reference: SENR8565-01 Systems Operation Testing and Adjusting; 14H and 16H Motor Graders Power Train; Page 42; Manual Modulation Pedal Adjustment; This module is part of RENR1405 14H Service Manual and RENR1410 16H Service Manual.

Description of Change:

Dimension (B) in Illustration 36 is incorrect. The correct dimension is:

Adaptable To:

(B) 447 ± 3 mm (17.6 ± 0.1 in)

Caterpillar Information System:

1999/03/01 Special Instruction, REHS0103-01, Available For Procedure For Dynamometer Test For Power Take-Off{3107}
1999/03/01 Fan Pulley/Adapter Changes Summarized{1356,1384,1359}
1999/03/01 Stronger Floatpin Design Available{5102,7120}
1999/02/22 Shielded Metal Arc Welding And Flux Cored Arc Welding Information {0679}
1999/02/22 New Radiator And Oil Cooler Mounting Configuration {1350}
1999/02/22 New Improved Tow Point Roller Design Now Being Used {6600}
1999/02/22 Correction To Service Brake Disc Information {4250,4255,7473}
1999/02/22 PS-360B Tires {4203}
1999/02/22 3116 Engine Oil Capacity {1326}
1999/02/22 New Scraper Available For Asphalt Compactors {6607}
1999/02/22 Vibratory Relief Pressure Increased To Shorten Vibratory Start And Stop Times {5652}
1999/02/22 Use Special Care With 143-3629 O-Ring Seals {1071}
1999/03/01 Improved Brake Switch Now Used{4262,1408}
1999/03/01 New Flywheel Housing Gasket For 3406 Machine Engines{1157}
1999/03/01 New Water Pumps With Improved Resistance To Shock Loads Used{1361}
1999/03/01 New Tie-Down Available For Asphalt Paver{6600,6100,6300}
1999/03/08 Software Improvements {7620}
1999/03/08 Use 155-1557 Gauge For Scraper Adjustment On Cast Steel Drive Wheels {4199,0766}
1999/03/08 New Seal Installers For Mid-Rollers And Idlers {4159,4180}
1999/03/08 Supplement To Add Fill Instructions On All Wheel Drive Pump In D&A Manual {3203}
1999/03/08 Supplement To Add Fill Instructions On All Wheel Drive Pump In OMM Manual {3203}
1999/03/08 New Basic Fuel Transfer Pump Group Includes New Outer Lip Type Seal {1256}
1999/03/08 Use FT2593 Spanner Wrench To Rotate Concentric Pin To Align Pipelayer Frames {7052}
1999/03/08 Improved Exhaust Tubes Now Used On Off-Highway Trucks {1061}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.