1998/01/19 Caterpillar


Correction To Operation & Maintenance Manual SEBU6956{0374,0375}

Usage:


824G (4SN) Wheel Tractors, 825G (6RN) Soil Compactors, 826G (7LN) Landfill Compactors

Reference: Service Manual Module, SEBU6956, Operation & Maintenance Manual, 824G Wheel Tractor & 825G Soil Compactor & 826G Landfill Compactor; Page 114. This module is found in Service Manual, SENR1325, 824G Wheel Tractor, 825G Soil Compactor, 826G Landfill Compactor.

Add the following Steps to Page 114 of Service Manual Module, SEBU6956.

5. Open the access door on the left side of the cab.

6. Remove the filter element. Clean the filter element with pressure air or wash the element in warm water and a nonsudsing household detergent.

7. Rinse in clean water and air dry thoroughly.

8. Install the filter element. Close the access door.

NOTE: If the filter element is damaged then replace the filter element.

Caterpillar Information System:

1998/01/19 New U-Cup Seal In Front And Rear Suspension Cylinder Groups Increases Service Life{7201}
1998/01/19 Improved Duo-Cone Seal Retainer Used In Certain Brake Groups And Wheel Arrangements{4251,4267,7561}
1998/01/19 Orifice Plate Has Been Added To Brake Oil Cooler Lines Group{4257,1365}
1998/01/19 New Indicator Assembly (Torque Convertor Oil Temperature) Available{7477}
1998/01/19 Improved Spring Assembly (Rear Window Strut){7310}
1998/01/19 Proper Assembly Of Elbow And O-Ring Seal For The Piston Pump Group{5055}
1998/01/19 Lubrication Intervals When Using Hammers On Backhoe Loaders{6333}
1998/01/19 Use 125-4633 Plate To Remove And Install Transmission{0635,3030,3150}
1998/01/05 Service Kits Available For Telehandler Roof Wiper {7305}
1998/01/05 Correct Boom Chain Information {6404,6460}
1998/01/05 New Water Separator Available {1250,1263}
1998/01/05 New VIMS Message Center Display Available {7601}
1998/01/19 Correction To Lubricant Viscosities And Refill Capacities Charts{7581}
1998/01/19 Bellows And Cable Strap Added To The Park Brake Cable Reduces Water Entry{4267}
1998/01/19 Improved Pin Replaces The Former Pin In Frame Leveling Group{5105}
1998/01/19 Single Belt Used On Fan Drive Group{1357}
1998/01/19 Front End Covers (Gland Nuts) Have Alternate Designs{7562}
1998/01/19 New Water Valve Assembly And New Board Control Assembly That Improve Reliability Of HVAC System Are Available{7320,7309,7304,7337,7311}
1998/01/19 Use 125-5723 Socket Wrench Assembly For Removal And Installation Of Stake-Type Differential Pinion Shaft Nut{3254}
1998/01/19 Improved Dual Horsepower Solenoid Now Available{1705}
1998/01/19 Machine Flash Software Ordered Through The Parts Distribution System Now Available Through Corporate Mail Box{1900,1920}
1998/01/19 Improved Alpha-Numeric SMCS (Service Management Control System) Component Codes Allow For Future Expansion Of System Categories{0374}
1998/01/19 Use 126-7175 Push Puller Assembly For Various General Purpose Applications{0600}
1998/01/19 Use 1U-9500 Flow Communicator On Caterpillar Diagnostic Tools{1250,0782}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.