Correction To Lubricant Viscosities And Refill Capacities Charts{7581}
Usage:
914G (7ZM, 9WM) Wheel Loaders IT14G (8ZM, 1WN) Intergrated Toolcarriers.
Reference: 914G Operations & Maintenance Manual, SEBU6868, Maintenance Section, Page 79, Lubricant Viscosities and Refill Capacities Charts.
Reference: IT14G Operations & Maintenance Manual, SEBU6869, Maintenance Section, Page 79, Lubricant Viscosities and Refill Capacities Charts.
The above chart shows the correct lubricant and temperature ranges for the 914G Wheel Loader and the IT14G Integrated Toolcarrier.
The chart above shows the correct refill capacities information for the 914G Wheel Loader and the IT14G Integrated Toolcarrier.
Caterpillar Information System:
1998/01/19 Correction To Operation & Maintenance Manual SEBU6956{0374,0375}
1998/01/19 New U-Cup Seal In Front And Rear Suspension Cylinder Groups Increases Service Life{7201}
1998/01/19 Improved Duo-Cone Seal Retainer Used In Certain Brake Groups And Wheel Arrangements{4251,4267,7561}
1998/01/19 Orifice Plate Has Been Added To Brake Oil Cooler Lines Group{4257,1365}
1998/01/19 New Indicator Assembly (Torque Convertor Oil Temperature) Available{7477}
1998/01/19 Improved Spring Assembly (Rear Window Strut){7310}
1998/01/19 Proper Assembly Of Elbow And O-Ring Seal For The Piston Pump Group{5055}
1998/01/19 Lubrication Intervals When Using Hammers On Backhoe Loaders{6333}
1998/01/19 Use 125-4633 Plate To Remove And Install Transmission{0635,3030,3150}
1998/01/05 Service Kits Available For Telehandler Roof Wiper {7305}
1998/01/05 Correct Boom Chain Information {6404,6460}
1998/01/05 New Water Separator Available {1250,1263}
1998/01/19 Bellows And Cable Strap Added To The Park Brake Cable Reduces Water Entry{4267}
1998/01/19 Improved Pin Replaces The Former Pin In Frame Leveling Group{5105}
1998/01/19 Single Belt Used On Fan Drive Group{1357}
1998/01/19 Front End Covers (Gland Nuts) Have Alternate Designs{7562}
1998/01/19 New Water Valve Assembly And New Board Control Assembly That Improve Reliability Of HVAC System Are Available{7320,7309,7304,7337,7311}
1998/01/19 Use 125-5723 Socket Wrench Assembly For Removal And Installation Of Stake-Type Differential Pinion Shaft Nut{3254}
1998/01/19 Improved Dual Horsepower Solenoid Now Available{1705}
1998/01/19 Machine Flash Software Ordered Through The Parts Distribution System Now Available Through Corporate Mail Box{1900,1920}
1998/01/19 Improved Alpha-Numeric SMCS (Service Management Control System) Component Codes Allow For Future Expansion Of System Categories{0374}
1998/01/19 Use 126-7175 Push Puller Assembly For Various General Purpose Applications{0600}
1998/01/19 Use 1U-9500 Flow Communicator On Caterpillar Diagnostic Tools{1250,0782}
1998/01/26 New Torque Converter Bearing Increases Service Life {3101}