Torque Check Necessary For Front Support Bracket Bolts When Damper And Pulley Are Removed {1153}
Usage:
All Caterpillar Machines Powered By 3406C (41Z734-862) Machine Engines
The proper amount of torque may have not been initially applied to the bolts that attach the front support bracket to the block. However, sufficient torque was applied to assure that the front support bracket bolts will not loosen. As the result, the torque on these bolts should be checked if the front damper and pulley are removed.
NOTE: Because there is no danger of the bolts becoming loose, it is only necessary to check the front support bracket bolts if the front damper and pulley are removed.
The applicable service manual should be referenced in order to verify the correct torque specification.
Caterpillar Information System:
1996/05/13 New Stronger Cylinder Head Bolts Used {1100}
1996/05/13 Improved Transmission Downshift Switch Available {1435,1400}
1996/05/06 Starter Solenoid Assembly May Need New Terminal {1467,1518}
1996/05/06 Low Profile Exhaust Pipe Available {1061}
1996/05/06 Transmission Oil Change Refill And Start-up Procedure {3004}
1996/05/06 New Body Pivot Pins Now Used {7258}
1996/05/06 Wheel Bearing Adjustment Intervals {4201,4208}
1996/05/06 Improvements To Challenger Agricultual Tractors Air Conditioning Available {7320,7343,7311}
1996/05/06 Steering Pump Pressure Limiter Logic Plugs Can Be Checked For Proper Torque {4306}
1996/05/06 High Performance Grease Used On Brake Control Linkage {4269}
1996/05/06 Service Magazine Special Edition, SEPD0304, Available {0374}
1996/05/06 Cast Duo-Cone Seals Available For Final Drives {4052,7561}
1996/05/13 New Components In Engine Camshaft Groups Provide Increased Lubrication To Thrust Washer Assembly {1210}
1996/05/20 New Assembly Procedure For Hoist Pump Groups With Double Shaft Seals And Weep Hole{5073}
1996/05/20 Hydraulic Tank Breather Location Change Affects Tank Filling Procedure{5056}
1996/06/03 Latches May Not Secure Radiator Guard Properly, Without Correct Panel Position{7155}
1996/06/03 Additional Transmission Clutch Piston Return Springs Have Been Added To Improve Service Life In Off-Highway Trucks{3150}
1996/06/03 Field Repair For Cracked Upper Strut Mount Plate{7051}
1996/06/03 Long Life Coolant Antifreeze (LLCA) Used In Cooling System{1395}
1996/06/03 U-Cup Rod Seals Available For Hydraulic Cylinders Used In Cold Temperatures{5102,5104}
1996/06/03 Improved Governor Servo Components Available For Use With Energize To Run Solenoids; Energize To Run Solenoid Stop Bolt Adjustment Procedure{1264,1259}
1996/06/03 New O-Ring Seal Improves Engine Initial Combustion Gas Sealing{1290}
1996/06/10 Hydraulic Valve Groups Use New Implement Quick Couplers {6129,5057,5051}
1996/06/10 Service Magazine Special Edition, SEPD0305, Available {0374}