1996/06/10 Caterpillar


Hydraulic Valve Groups Use New Implement Quick Couplers {6129,5057,5051}

Usage:


Challenger 35 (8DN),
Challenger 45 (1DR),
Challenger 55 (7DM) Agricultural Tractors

Description of Change: New quick couplers are being used on the hydraulic valve groups. The new coupler components reduce leakage, keep the coupler cleaner, and require lower coupling and uncoupling forces.

Adaptable To: The new quick couplers are effective with Challenger 35 (8DN0544), Challenger 45 (1DR1093), and Challenger 55 (7DM1) Agricultural Tractors. The new quick couplers are adaptable to all earlier Challenger 35, and Challenger 45 Agricultural Tractors.

The following chart shows the new serviceable part numbers and the quantities required for the couplers used in each of the groups.

See the following illustrations for part locations.


Implement quick couplers.


Implement quick couplers for 4-valve group.

Caterpillar Information System:

1996/06/03 New O-Ring Seal Improves Engine Initial Combustion Gas Sealing{1290}
1996/06/03 Improved Governor Servo Components Available For Use With Energize To Run Solenoids; Energize To Run Solenoid Stop Bolt Adjustment Procedure{1264,1259}
1996/06/03 U-Cup Rod Seals Available For Hydraulic Cylinders Used In Cold Temperatures{5102,5104}
1996/06/03 Long Life Coolant Antifreeze (LLCA) Used In Cooling System{1395}
1996/06/03 Field Repair For Cracked Upper Strut Mount Plate{7051}
1996/06/03 Additional Transmission Clutch Piston Return Springs Have Been Added To Improve Service Life In Off-Highway Trucks{3150}
1996/06/03 Latches May Not Secure Radiator Guard Properly, Without Correct Panel Position{7155}
1996/05/20 Hydraulic Tank Breather Location Change Affects Tank Filling Procedure{5056}
1996/05/20 New Assembly Procedure For Hoist Pump Groups With Double Shaft Seals And Weep Hole{5073}
1996/05/13 New Components In Engine Camshaft Groups Provide Increased Lubrication To Thrust Washer Assembly {1210}
1996/05/13 Torque Check Necessary For Front Support Bracket Bolts When Damper And Pulley Are Removed {1153}
1996/05/13 New Stronger Cylinder Head Bolts Used {1100}
1996/06/10 Service Magazine Special Edition, SEPD0305, Available {0374}
1996/06/10 New Torque Converter Ring (Seal) Used To Improve Service Life {3100}
1996/06/10 New Hose Assembly Now Used In Oil Cooler Lines Group For Easier Orientation During Installation {4257}
1996/06/10 New And Modified Hoist Cylinder Valves And Plates Available To Soften Landing Of Body {5102}
1996/06/10 Special Instruction SEHS9965 Available For Installation Procedure For 129-0899 Bearings Located In Rear Suspension Group {7212,7551}
1996/06/10 Special Instruction SEHS9966 Available For Field Installation For Remanufactured Wheel Arrangement And Axle Housing Assembly {3260}
1996/06/10 New Ring Seal Material Used In Brake Groups For Improved Service Life {7555,4251}
1996/06/10 Special Instruction SEHS8433 Available For Repair Of Wheel And Track Loader Lift Arms And Levers {6107,6119}
1996/06/10 Adjustment Screw With Better Fit Available For Pump Pressure Compensator Valve Groups {5086}
1996/06/10 New U-Cup Seal And Spacer(s) Replace Cylinder Rod Packing Seal {5101,5102,5103,5104,5213,5223,5229,5265}
1996/06/10 Stainless Steel Sleeve Assemblies Used In Exhaust Ports {1059}
1996/06/10 Incorrect Full Torque Setting Values Displayed On Engine Information Tags {1901}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.