Retrofit Of Corporate Fuel Cap To Threaded Fuel Tank Filler Neck Now Available{1273}
Usage:
On All Caterpillar Machines
A retrofit of the corporate fuel cap to fit the 120.7 mm (4.75 in) threaded fuel tank filler neck is now available.
The 7X-7700 Fuel Cap Assembly can be retrofitted to suit the 120.7 mm (4.75 in) threaded fuel tank filler neck using two adapters. The 125-7873 Adapter and 9X-2207 Adapter Kit are screwed on to the fuel tank filler necks, after which the 7X-7700 Fuel Cap Assembly is mounted on the filler neck.
This change is adaptable to all next higher levels of the 4B-1455 Fuel Cap Assembly, which may be serviced with the 9X-2207 Adapter, 125-7873 Adapter and 7X-7700 Fuel Cap Assembly.
Caterpillar Information System:
1995/09/25 Pump Conversion Required for Replacement of Water Spray Pump{5612}
1995/09/25 Replacement Knob Now Available For Sonic Feeder Control Sensors{5643}
1995/09/25 Improved Bolt Retention On Differential Carrier To Axle Housing Bolted Joint{3260,3284}
1995/09/25 Bolt Tightening Specifications For Engine Auxiliary Drive Pulley Group{1205,1207}
1995/09/25 Components Of The 3Z-3731 Lincoln Lubrication System Now Serviced Separately{7509}
1995/09/25 Pump And Motor For The 106-4151 Electric Drive Pump Group Now Serviced Seperately{4324,4325}
1995/09/25 Hose Has Been Added To The Brake Control Group To Increase The Service Life Of The 6G-8425 Control Valve Group{4257,4267}
1995/09/25 PTO Lube Pressure Test Fitting Available{3107}
1995/09/25 New Engine Water Pump Elbow and Seal Resists Compression Set and Abrasion{1361}
1995/09/25 The 1R-0750 High Efficiency Fuel Filter Assembly Available For 3306 Engine{1254,1261}
1995/09/18 New Engine Water Pump Groups Include New Seal Group{1361}
1995/09/18 New Stronger Engine Lifting Eye Bracket Used{1122}
1995/09/25 Improved Stop Lamp Pressure Switch Available{1435,7805}
1995/09/25 Fuel System Service Information{1250}
1995/10/02 Strengthened Drive Wheel Provides Increased Life {4199}
1995/10/02 3G-4667 Relief Valve Group (Steering Crossover Valve) Now Serviced As A Complete Group {4322}
1995/10/02 Rear Suspension Cylinder Charge Can Be Checked By Measuring Between The Rear Suspension Cylinger Retaining Pins {7213}
1995/10/02 Service Manual and Parts Manual Literature Now Available {0374,0375,7568}
1995/10/02 Numbering The Crankshaft To Match Counterweights {1202,1231}
1995/10/09 Caterpillar Legendary Service Literature Catalog SELD0811 Updated {0374}
1995/10/09 Bolt Dampers Have Been Added To The No.5 Clutch Stack In The 6Y-5642 Planetary Group {3155,3169}
1995/10/09 Body Mounting Group Baffle (Mudflap) Profile Has Been Changed To Improve The Service Life Of The Baffle {4220,7258}
1995/10/09 Steering Modification To Prevent The Jacket Tube Bearing Working Loose {4301,4309,4310}
1995/10/09 New Flushing Valve Used On Drum Propel Motor Improves Flushing And Cooling {4351,5058}