768C TRACTOR & 769C TRUCK POWER TRAIN Caterpillar

(1) Torque for 12 long studs (marked with an "X") ... 260 ± 30 lb. ft.(354 ± 40 N·m)

(2) Put 2P2506 Anti-Seize Compound on face of washers and threads of nuts. Tighten nuts to a torque of ... 525 ± 20 lb. ft.(715 ± 25 N·m)

(3) Torque for six short studs ... 260 ± 30 lb. ft.(354 ± 40 N·m)

(4) Put lubricant on seal.

(5) These surfaces must be clean and free of oil and grease before wheel assembly is installed.

(6) Torque for 23 studs ... 110 ± 15 lb. ft.(149 ± 20 N·m)

(7) Put lubricant on seal.

(8) Lockwire must not go over the heads of the bolts.

(9) Put 2P2506 Anti-Seize Compound on threads of nuts. Tighten nuts to a torque of ... 890 ± 40 lb. ft.(1205 ± 55 N·m)