Fuel Ratio Control
Usage:
Disassemble Fuel Ratio Control
start by:
a) remove fuel ratio control
1. Remove the bolts and the housing (1).
2. Remove wire seal (2) from the bolts.
3. Remove valve assembly (3).
4. Remove seal (4) and O-ring seal from valve.
5. Remove the retainer (5) and two springs (6).
6. Remove three bolts (9) and cover (10).
7. Remove valve (7), diaphragm (8), retainer and spring.
8. Remove pin (12) from valve (7).
9. Remove cover (11) from the valve.
10. Remove the seal from the cover (11).
Caterpillar Information System:
3406 INDUSTRIAL & MARINE ENGINES Automatic Timing Advance
3406 INDUSTRIAL & MARINE ENGINES Automatic Timing Advance (Later)
3406 INDUSTRIAL & MARINE ENGINES Automatic Timing Advance (Earlier)
3406 INDUSTRIAL & MARINE ENGINES Fuel Transfer Pump (Later)
3406 INDUSTRIAL & MARINE ENGINES Fuel Transfer Pump (Earlier)
3406 INDUSTRIAL & MARINE ENGINES Fuel Transfer Pump
3406 INDUSTRIAL & MARINE ENGINES Tachometer Drive
3406 INDUSTRIAL & MARINE ENGINES Service Meter
3406 INDUSTRIAL & MARINE ENGINES Accessory Drive
3406 INDUSTRIAL & MARINE ENGINES Sea Water Pump
3406 INDUSTRIAL & MARINE ENGINES Fuel Filter Base
3406 INDUSTRIAL & MARINE ENGINES Fuel Priming Pump
3406 INDUSTRIAL & MARINE ENGINES Fuel Ratio Control
3406 INDUSTRIAL & MARINE ENGINES Fuel Injection Lines
3406 INDUSTRIAL & MARINE ENGINES Fuel Injection Lines
3406 INDUSTRIAL & MARINE ENGINES Fuel Injection Pump Housing And Governor (Earlier)
3406 INDUSTRIAL & MARINE ENGINES Fuel Injection Pump Housing And Governor (Later)
3406 INDUSTRIAL & MARINE ENGINES Fuel Injection Pump Housing And Governor (Earlier And Later)
3406 INDUSTRIAL & MARINE ENGINES Fuel Injection Pump Housing And Governor
3406 INDUSTRIAL & MARINE ENGINES Governor
3406 INDUSTRIAL & MARINE ENGINES Fuel Injection Pump Housing
3406 INDUSTRIAL & MARINE ENGINES Fuel Injection Pump And Governor Drive
3406 INDUSTRIAL & MARINE ENGINES Fuel Injection Pump And Governor Drive
3406 INDUSTRIAL & MARINE ENGINES Aftercooler Core