3406 INDUSTRIAL & MARINE ENGINES Caterpillar


Fuel Injection Lines

Usage:

Install Fuel Injection Lines

1. Put the fuel lines in position on the engine. Remove the protection covers from the fuel line connections. Connect the fuel injection lines to the fuel injection pump housing and the cylinder head. Tighten the fuel line nuts to a torque of 30 ± 5 lb.ft. (40 ± 7 N·m) with tool (A).

2. Install three clamps (1) on the cylinder head with bolts and lockwashers. Install bracket (2) on the governor with two bolts and lockwashers.

3. Install line (4) on block (3) and block (7). Connect two lines (5) to block (3) and the fuel injection pump.

4. Install three clamps (6) on the bracket with a bolt and nut.

5. Connect line (10) to fuel filter base (9) and fuel transfer pump (8).

Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.