Usage:
NOTE: Put plugs or caps in all fuel line openings.
1. Disconnect fuel supply line (2) and fuel pressure line (1) from fuel transfer pump (3).
2. Remove two bolts (4) that fasten the fuel transfer pump to the governor drive housing. Remove the fuel transfer pump.
3. Remove the O-ring seal from the transfer pump and remove the gasket from between the governor drive housing and transfer pump.
Install Fuel Transfer Pump
1. Clean the contact surfaces of the transfer pump and the governor drive housing.
2. Install new gasket (1) between fuel transfer pump (2) and governor drive housing. Install an O-ring seal on the transfer pump and put the pump in position on the housing. Install the two bolts that fasten the pump to the housing.
3. Connect fuel pressure line (3) and fuel supply line (4) to the transfer pump.