Fuel Filter Base
Usage:
Remove Fuel Filter Base
start by:
a) remove fuel priming pump
1. Use tool (A) as shown to remove filter (1).
2. Disconnect fuel inlet line (4) from fuel filter base (5).
3. Disconnect the fuel filter base from block (3).
4. Remove two nuts (2) that fasten the fuel filter base to the aftercooler housing. Remove the fuel filter base.
Install Fuel Filter Base
1. Put fuel filter base (1) in position on the aftercooler housing. Install the two nuts that fasten the base to the housing.
2. Connect the fuel filter base to block (2).
3. Connect fuel inlet line (3) to the filter base.
4. Install fuel filter (4) on the base. Follow the instructions on the filter for correct installation procedure.
end by:
a) install fuel priming pump
Caterpillar Information System:
3406 INDUSTRIAL & MARINE ENGINES Fuel Priming Pump
3406 INDUSTRIAL & MARINE ENGINES Electric Starting Motor
3406 INDUSTRIAL & MARINE ENGINES Instrument Panel
3406 INDUSTRIAL & MARINE ENGINES Rear Support
3406 INDUSTRIAL & MARINE ENGINES Engine Front Support
3406 INDUSTRIAL & MARINE ENGINES Introduction
3406 INDUSTRIAL & MARINE ENGINES General Instructions
3406 INDUSTRIAL & MARINE ENGINES Introduction
3406 INDUSTRIAL & MARINE ENGINES Testing And Adjusting
3406 INDUSTRIAL & MARINE ENGINES Attachment Systems Operation
3406 INDUSTRIAL & MARINE ENGINES Shut-Off Solenoids
3406 INDUSTRIAL & MARINE ENGINES Starter Solenoid
3406 INDUSTRIAL & MARINE ENGINES Sea Water Pump
3406 INDUSTRIAL & MARINE ENGINES Accessory Drive
3406 INDUSTRIAL & MARINE ENGINES Service Meter
3406 INDUSTRIAL & MARINE ENGINES Tachometer Drive
3406 INDUSTRIAL & MARINE ENGINES Fuel Transfer Pump
3406 INDUSTRIAL & MARINE ENGINES Fuel Transfer Pump (Earlier)
3406 INDUSTRIAL & MARINE ENGINES Fuel Transfer Pump (Later)
3406 INDUSTRIAL & MARINE ENGINES Automatic Timing Advance (Earlier)
3406 INDUSTRIAL & MARINE ENGINES Automatic Timing Advance (Later)
3406 INDUSTRIAL & MARINE ENGINES Automatic Timing Advance
3406 INDUSTRIAL & MARINE ENGINES Fuel Ratio Control
3406 INDUSTRIAL & MARINE ENGINES Fuel Ratio Control