3408C ENGINE FOR CATERPILLAR BUILT MACHINES Caterpillar

4P3581 Rear Gear Group

(1) Torque for four studs ... 110 ± 20 N·m (81 ± 15 lb ft)

(2) Torque for nut ... 406 ± 68 N·m (300 ± 50 lb ft)

NOTE: Put "V" marks in alignment on balancer gear and crankshaft gear with No. 1 cylinder TC.

6N2415

6N2415 Rear Gear Group

(1) Torque for stud ... 27 ± 4 N·m (20 ± 3 lb ft)

NOTE: Put "V" marks in alignment on balancer gear and crankshaft gear with No. 1 cylinder TC.

7N9576

7N9576 Rear Gear Group

(1) Torque for nut ... 406 ± 68 N·m 300 ± 50 lb ft)

NOTE: Put "V" marks in alignment on balancer gear and crankshaft gear with No. 1 cylinder TC.

5R4412

5R4412 Rear Gear Group

(1) Torque for nut ... 406 ± 68 N·m (300 ± 50 lb ft)

NOTE: Put "V" marks in alignment on balancer gear and crankshaft gear with No. 1 cylinder TC.

6I1970

6I1970 Rear Gear Group

(1) Torque for nut ... 406 ± 68 N·m (300 ± 50 lb ft)

NOTE: Put "V" marks in alignment on balancer gear and crankshaft gear with No. 1 cylinder TC.