Usage:
Sequence For Rocker Arm Bolts
(1) Bore in rocker arm for shaft (new) ... 24.790 ± .013 mm (.9759 ± .0005 in)
Diameter of shaft (new) ... 24.750 ± .013 mm (.9745 ± .0005 in)
(2) Put 2P2506 Thread Lubricant on the threads of all bolts that hold rocker arm shaft and tighten the bolts in the following step sequence.
1. Tighten bolts from 1 to 4 in number sequence to ... 280 ± 27 N·m (210 ± 20 lb ft)
2. Tighten bolts from 1 to 4 in number sequence to ... 440 ± 20 N·m (320 ± 15 lb ft)
3. Tighten bolts from 1 to 4 in number sequence again to ... 440 ± 20 N·m (320 ± 15 lb ft)
(3) Torque for locknut for valve adjustment screw ... 28 ± 4 N·m (22 ± 3 lb ft)
(4) Torque for locknut for bridge adjustment screw ... 28 ± 4 N·m (22 ± 3 lb ft)
(5) Valve lash (clearance):
Intake valves ... 0.38 mm (.015 in)
Exhaust valves ... 0.76 mm (.030 in)
(6) Height to top of dowel ... 53.3 ± 0.5 mm (2.10 ± .02 in)
(7) Diameter of dowel (new) ... 11.008 ± 0.003 mm (.4334 ± .0001 in)
Bore in bridge for dowel (new) ... 11.13 ± 0.05 mm (.438 ± .002 in)
Bore in head for dowel ... 10.968 ± 0.020 mm (.4318 ± .0008 in)
(8) Diameter of valve lifter (new) ... 27.896 ± 0.013 mm (1.0983 ± .0005 in)
Bore in block for valve lifter (new) ... 27.953 ± 0.019 mm (1.1005 ± .0008 in)
(9) Inspect guide spring (9). See Guideline For Reusable Parts, SEBF8066
(10) 2N7229 Spring:
Length under test force ... 74.2 mm (2.92 in)
Test force ... 45 to 53 N (10 to 12 lb)
Free length after test ... 114.3 mm (4.50 in)
Outside diameter ... 29.7 mm (1.17 in)
(11) Dowel length above top surface of rocker shaft support to be (both ends) ... 12.7 ± 1.0 mm (.50 ± .04 in)
(12) Clearance for rocker arms (both ends) ... 0.30 to 1.40 mm (.012 to .055 in)
(13) Use 2N7228 Washer as needed to get clearance (12).