Usage:
Show/hide table
|
||
Show/hide table
|
||
May 2009 NEW TRACK ROLLERS FOR D6N FAMILY MACHINES |
New track rollers are available for the
following specific machine models:
Elevated Sprocket
Tractors
D6N/M, D5H
Track Type Loaders
951, 953C/B, 955
Conventional Tractors
D5, D5B, D6, 561
Hydraulic Excavator
215SA, 225
The new track roller is a
standardization of ?D6N sized? rollers and may be used with 7.50? & 6.91? pitch
(203.2 & 175.5mm) sealed and lubricated, hybrid, heavy duty, rotating bushing,
and sealed track; but not with SystemOne? track.
The new design separates the mounting caps from the seal collar to
eliminate flexing in the collars and avoid oil loss.
Similar to the D6T SystemOne rollers, these rollers are maintenance free
and serviced as a group only.
Part Number
Information
On the attached pages are tables of part number information that should be used
to select the correct replacement parts for D6N/M, D5H, D5, D5B, D5H, D6, 215SA,
225, 561, 951, 953C/B, and 955 track roller groups, rim assemblies
(shells), and shafts.
Replacement of track roller groups, rim assemblies (shells) or shafts will be
service replaced by an entire track roller group, caps, and hardware.
Contact Information
Thomas D. Rohn
Caterpillar Inc.
Core Components Division
Product Manager- Undercarriage
Marketing
Phone: 309.578.1746
Email:
Rohn_Thomas_D@cat.com |
Toll Free:
(877) 228-2420
International: (309) 578 ? 6298
E-mail:
CIC@cat.com |
Table 1:
Caps and Hardware
Models | Hardware | Component Description | Former Component Part # | New Roller Group Part # | Cap (QTY=2) | Washer (QTY=4) | Bolt (QTY=4) |
D5, D6, 561, 951, 955, D5B 215SA, 225 | 5/8" | Roller Group SF | 118-1611 | 310-4912 | 223-9110 | 5P-8247 | 1B-4367 |
953B/C, D6N/M, D5H | 5/8? | Roller Group SF | 121-0824 | 310-4912 | 223-9110 | 5P-8247 | 1B-4367 |
953B/C, D6N/M, D5H | 16mm | Roller Group SF | 121-0824 | 310-4912 | 223-9110 | 5P-8247 | 8T-0281 |
D5, D6, 561, 951, 955, 215SA, 225 | 5/8" | Roller Shell SF | 9S-9535 | 310-4912 | 223-9110 | 5P-8247 | 1B-4367 |
D6, 951, 955, 215SA, 225, D5, 561 | 5/8" | Shaft | 118-1613 | 310-4912 | 223-9110 | 5P-8247 | 1B-4367 |
517 | 16mm | Roller Group SF | 149-1050 | 310-4912 | 322-4691 | 8T-3282 | 6V-3669 |
517, D5H, 953B/C, D6N/M | 5/8" | Roller Shell SF | 121-0825 | 310-4912 | 223-9110 | 5P-8247 | 1B-4367 |
517, D5H, 953B/C, D6N/M | 16mm | Roller Group SF | 121-0825 | 310-4912 | 223-9110 | 5P-8247 | 8T-0281 |
D5, 561, D6, 951, 955, D5B | 5/8? | Roller Group DF | 118-1612 | 310-4915 | 223-9110 | 5P-8247 | 1B-4367 |
D5H, 953B/C, D6N/M | 5/8? | Roller Group DF | 121-0827 | 310-4915 | 223-9110 | 5P-8247 | 1B-4367 |
D5H, 953B/C, D6N/M | 16mm | Roller Group DF | 121-0827 | 310-4915 | 223-9110 | 5P-8247 | 8T-0281 |
D5, 561, D6, 951, 955 | 5/8" | Roller Shell DF | 9S-9534 | 310-4915 | 223-9110 | 5P-8247 | 1B-4367 |
D6, 951, 955, 215SA, 225, D5, 561 | 5/8" | Shaft | 118-1613 | 310-4915 | 223-9110 | 5P-8247 | 1B-4367 |
517 | 16mm | Roller Group DF | 149-1051 | 310-4915 | 322-4691 | 8T-3282 | 6V-3669 |
517, D5H, 953B/C, D6N/M | 5/8" | Roller Shell DF | 121-0828 | 310-4915 | 223-9110 | 5P-8247 | 1B-4367 |
517, D5H, 953B/C, D6N/M | 16mm | Roller Shell DF | 121-0828 | 310-4915 | 223-9110 | 5P-8247 | 8T-0281 |
D5H, 953B/C, D6N/M | 16mm | Roller Group DF (Tall Flange) | 121-0830 | 310-4918 | 223-9110 | 5P-8247 | 8T-0281 |
D5H, 953B/C, D6N/M | 16mm | Roller Group DF (Tall Flange) | 121-0831 | 310-4918 | 223-9110 | 5P-8247 | 8T-0281 |
Custom Track Service
(CTS)
Reference the attached
wear charts for Custom Track Service.
Standardized Single and Double Flange
Rollers
Caliper | %Worn | Depth Gauge | Ultrasonic | ||||
In | mm | In | mm | In | mm | ||
7.77 | 197.5 | 0 | 0.59 | 15.0 | 1.76 | 44.7 | |
7.73 | 196.5 | 3 | 0.61 | 15.5 | 1.74 | 44.2 | |
7.69 | 195.5 | 6 | 0.63 | 16.0 | 1.72 | 43.7 | |
7.65 | 194.5 | 9 | 0.65 | 16.5 | 1.70 | 43.2 | |
7.61 | 193.5 | 12 | 0.67 | 17.0 | 1.68 | 42.7 | |
7.57 | 192.5 | 15 | 0.69 | 17.5 | 1.66 | 42.2 | |
7.53 | 191.5 | 18 | 0.71 | 18.0 | 1.64 | 41.7 | |
7.49 | 190.0 | 21 | 0.73 | 18.5 | 1.62 | 41.1 | |
7.45 | 189.0 | 24 | 0.75 | 19.0 | 1.60 | 40.6 | |
7.41 | 188.0 | 27 | 0.77 | 19.5 | 1.58 | 40.1 | |
7.37 | 187.0 | 30 | 0.79 | 20.0 | 1.56 | 39.6 | |
7.33 | 186.0 | 33 | 0.81 | 20.5 | 1.54 | 39.1 | |
7.29 | 185.0 | 36 | 0.83 | 21.0 | 1.52 | 38.6 | |
7.25 | 184.0 | 39 | 0.85 | 21.5 | 1.50 | 38.1 | |
7.21 | 183.0 | 42 | 0.87 | 22.0 | 1.48 | 37.6 | |
7.17 | 182.0 | 45 | 0.89 | 22.5 | 1.46 | 37.1 | |
7.13 | 181.0 | 48 | 0.91 | 23.0 | 1.44 | 36.6 | |
7.09 | 180.0 | 51 | 0.93 | 23.5 | 1.42 | 36.1 | |
7.05 | 179.0 | 54 | 0.95 | 24.0 | 1.40 | 35.6 | |
7.01 | 178.0 | 57 | 0.97 | 24.5 | 1.38 | 35.1 | |
6.97 | 177.0 | 60 | 0.99 | 25.0 | 1.36 | 34.5 | |
6.93 | 176.0 | 63 | 1.01 | 25.5 | 1.34 | 34.0 | |
6.89 | 175.0 | 66 | 1.03 | 26.0 | 1.32 | 33.5 | |
6.85 | 174.0 | 69 | 1.05 | 26.5 | 1.30 | 33.0 | |
6.81 | 173.0 | 72 | 1.07 | 27.0 | 1.28 | 32.5 | |
6.77 | 172.0 | 75 | 1.09 | 27.5 | 1.26 | 32.0 | |
6.73 | 171.0 | 78 | 1.11 | 28.0 | 1.24 | 31.5 | |
6.69 | 170.0 | 81 | 1.13 | 28.5 | 1.22 | 31.0 | |
6.65 | 169.0 | 84 | 1.15 | 29.0 | 1.20 | 30.5 | |
6.61 | 168.0 | 87 | 1.17 | 29.5 | 1.18 | 30.0 | |
6.57 | 167.0 | 90 | 1.19 | 30.0 | 1.16 | 29.5 | |
6.53 | 166.0 | 92 | 1.21 | 30.5 | 1.14 | 29.0 | |
6.49 | 165.0 | 94 | 1.23 | 31.0 | 1.12 | 28.4 | |
6.45 | 164.0 | 96 | 1.25 | 32.0 | 1.10 | 27.9 | |
6.41 | 163.0 | 98 | 1.27 | 32.5 | 1.08 | 27.4 | |
6.37 | 162.0 | 100 | 1.29 | 33.0 | 1.06 | 26.9 | |
6.33 | 161.0 | 102 | 1.31 | 33.5 | 1.04 | 26.4 | |
6.29 | 160.0 | 104 | 1.33 | 34.0 | 1.02 | 25.9 | |
6.25 | 159.0 | 106 | 1.35 | 34.5 | 1.00 | 25.4 | |
6.21 | 157.5 | 108 | 1.37 | 35.0 | 0.98 | 24.9 | |
6.17 | 156.5 | 110 | 1.39 | 35.5 | 0.96 | 24.4 | |
6.13 | 155.5 | 112 | 1.41 | 36.0 | 0.94 | 23.9 | |
6.09 | 154.5 | 114 | 1.43 | 36.5 | 0.92 | 23.4 | |
6.05 | 153.5 | 116 | 1.45 | 37.0 | 0.90 | 22.9 | |
6.01 | 152.5 | 118 | 1.47 | 37.5 | 0.88 | 22.4 | |
5.97 | 151.5 | 120 | 1.49 | 38.0 | 0.86 | 21.8 |
Double Flange Rollers (Tall Flange)
Caliper | %Worn | Depth Gauge | Ultrasonic | ||||
In | mm | In | mm | In | mm | ||
7.77 | 197.5 | 0 | 0.77 | 19.5 | 1.76 | 44.7 | |
7.73 | 196.5 | 4 | 0.79 | 20.0 | 1.74 | 44.2 | |
7.69 | 195.5 | 8 | 0.81 | 20.5 | 1.72 | 43.7 | |
7.65 | 194.5 | 12 | 0.83 | 21.0 | 1.70 | 43.2 | |
7.61 | 193.5 | 16 | 0.85 | 21.5 | 1.68 | 42.7 | |
7.57 | 192.5 | 20 | 0.87 | 22.0 | 1.66 | 42.2 | |
7.53 | 191.5 | 24 | 0.89 | 22.5 | 1.64 | 41.7 | |
7.49 | 190.0 | 28 | 0.91 | 23.0 | 1.62 | 41.1 | |
7.45 | 189.0 | 32 | 0.93 | 23.5 | 1.60 | 40.6 | |
7.41 | 188.0 | 36 | 0.95 | 24.0 | 1.58 | 40.1 | |
7.37 | 187.0 | 40 | 0.97 | 24.5 | 1.56 | 39.6 | |
7.33 | 186.0 | 44 | 0.99 | 25.0 | 1.54 | 39.1 | |
7.29 | 185.0 | 48 | 1.01 | 25.5 | 1.52 | 38.6 | |
7.25 | 184.0 | 52 | 1.03 | 26.0 | 1.50 | 38.1 | |
7.21 | 183.0 | 56 | 1.05 | 26.5 | 1.48 | 37.6 | |
7.17 | 182.0 | 60 | 1.07 | 27.0 | 1.46 | 37.1 | |
7.13 | 181.0 | 64 | 1.09 | 27.5 | 1.44 | 36.6 | |
7.09 | 180.0 | 68 | 1.11 | 28.0 | 1.42 | 36.1 | |
7.05 | 179.0 | 72 | 1.13 | 28.5 | 1.40 | 35.6 | |
7.01 | 178.0 | 76 | 1.15 | 29.0 | 1.38 | 35.1 | |
6.97 | 177.0 | 80 | 1.17 | 29.5 | 1.36 | 34.5 | |
6.93 | 176.0 | 84 | 1.19 | 30.0 | 1.34 | 34.0 | |
6.89 | 175.0 | 88 | 1.21 | 30.5 | 1.32 | 33.5 | |
6.85 | 174.0 | 91 | 1.23 | 31.0 | 1.30 | 33.0 | |
6.81 | 173.0 | 94 | 1.25 | 32.0 | 1.28 | 32.5 | |
6.77 | 172.0 | 97 | 1.27 | 32.5 | 1.26 | 32.0 | |
6.73 | 171.0 | 100 | 1.29 | 33.0 | 1.24 | 31.5 | |
6.69 | 170.0 | 103 | 1.31 | 33.5 | 1.22 | 31.0 | |
6.65 | 169.0 | 106 | 1.33 | 34.0 | 1.20 | 30.5 | |
6.61 | 168.0 | 109 | 1.35 | 34.5 | 1.18 | 30.0 | |
6.57 | 167.0 | 112 | 1.37 | 35.0 | 1.16 | 29.5 | |
6.53 | 166.0 | 115 | 1.39 | 35.5 | 1.14 | 29.0 | |
6.49 | 165.0 | 118 | 1.41 | 36.0 | 1.12 | 28.4 | |
6.45 | 164.0 | 121 | 1.43 | 36.5 | 1.10 | 27.9 |
Show/hide table
|