14G & 16G MOTOR GRADERS POWER TRAIN Caterpillar


Rear Wheels

Usage:

Remove And Install Rear Wheels

1. Lift the machine off the ground. Install tooling (A) under the frame.

2. Fasten a hoist to the rear wheel and tire.

3. Remove bolts (2) and the washers.

4. Remove rear wheel (1). Weight is 245 kg (540 lb.).

NOTE: The following steps are for the installation of the rear wheels.

5. Fasten a hoist to the rear wheel. Put it in position on the wheel spindle over the studs.

6. Install the washers and bolts that hold rear wheel (1) to the wheel spindle.

7. Lift the tandem housing and remove tooling (A).

8. Tighten bolts (2) to a torque of 1050 ± 35 N·m (780 ± 26 lb.ft.).

Caterpillar Information System:

14G & 16G MOTOR GRADERS POWER TRAIN Axles
16G Motor Grader Electrical System 16G Motor Grader Electrical System
14G Motor Grader Electrical System 14G Motor Grader Electrical System
12G, 120G, 130G, 140G and 160G Motor Graders Electrical System, Schematic Part Number 7T-9457-02 (For Serial Numbers 3WC1067-UP 61M12027-UP 87V8360-UP 11W1251-UP 4HD1-UP 74V2321-UP 12W1082-UP 5MD1-UP 72V10334-UP 13W741-UP 4JD1-UP) 12G, 120G, 130G, 140G and 160G Motor Graders Electrical System, Schematic Part Number 7T-9457-02 (For Serial Numbers 3WC1067-UP 61M12027-UP 87V8360-UP 11W1251-UP 4HD1-UP 74V2321-UP 12W1082-UP 5MD1-UP 72V10334-UP 13W741-UP 4JD1-UP)
12G, 120G, 130G & 140G MOTOR GRADER VEHICLE SYSTEMS Blade Assembly
12G, 120G, 130G & 140G MOTOR GRADER VEHICLE SYSTEMS Rear Bumper
12G, 120G, 130G & 140G MOTOR GRADER VEHICLE SYSTEMS Pivot Pin Bearings
12G, 120G, 130G & 140G MOTOR GRADER VEHICLE SYSTEMS Main Frames
12G, 120G, 130G & 140G MOTOR GRADER VEHICLE SYSTEMS Hydraulic Cylinders
12G, 120G, 130G & 140G MOTOR GRADER VEHICLE SYSTEMS Articulation Cylinders
12G, 120G, 130G & 140G MOTOR GRADER VEHICLE SYSTEMS Fuel Tank
12G, 120G, 130G & 140G MOTOR GRADER VEHICLE SYSTEMS Differential Lock Actuator Valve
14G & 16G MOTOR GRADERS POWER TRAIN Drive Chains
14G & 16G MOTOR GRADERS POWER TRAIN Brake And Wheel Spindle Housing
14G & 16G MOTOR GRADERS POWER TRAIN Tandem Housings
14G & 16G MOTOR GRADERS POWER TRAIN Drive Sprockets
14G & 16G MOTOR GRADERS POWER TRAIN Final Drives
14G & 16G MOTOR GRADERS POWER TRAIN Parking Brake Rotochamber
14G & 16G MOTOR GRADERS POWER TRAIN Transmission Oil Filter Housing And Base
14G & 16G MOTOR GRADERS POWER TRAIN Relief Control Valve
14G & 16G MOTOR GRADERS POWER TRAIN Differential
14G & 16G MOTOR GRADERS POWER TRAIN Transmission Oil And Scavenge Pump
14G & 16G MOTOR GRADERS POWER TRAIN Transmission
14G & 16G MOTOR GRADERS POWER TRAIN Transfer Gears
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.