Product Support Program For Converting The Two Speed Transmissions To Three Speed Transmissions On Certain 825G Compactors
Usage:
@media screen {
div.divFooter {
display: none;
}
}
@media print {
div.divFooter {
position: fixed;
bottom: 0;
right: 0;
}
}
NOTE: The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst.
NOTE: This Program can only be administered after a failure occurs. The decision whether to apply the Program is made by the dealer. When reporting the repair, use "PS5323" as the Part Number and "7755" as the Group Number. Use "96" as the Warranty Claim Description Code and use "Z" as the SIMS Description Code.
Termination Date
August 31, 1999Problem
The two speed transmission can be converted to three speed transmission on certain 825G Compactors. Some 825G Compactors were shipped with transmission controls providing for only two speeds. If desired, these machines can be modified to three speed machines by installing a new transmission control.
Affected Product
Model & Identification Number
825G (6RN258-312)
Parts Needed
- 1 - 1475108 Transmission Control
Action Required
Remove the existing transmission control and replace with 1475108 Transmission Control. The transmission control is mounted horizontally on the right-hand rear of the cab floor.
Service Claim Allowances
NOTE: This is a 1-hour job.
Parts Disposition
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.
Caterpillar Information System:
Product Support Program For Installing A 105 Amp Circuit Breaker On Certain Challenger 65D, 75C, 75D, 85C And 85D Product Support Program For Installing A 105 Amp Circuit Breaker On Certain Challenger 65D, 75C, 75D, 85C And 85D
Certain Engine Software Needs To Be Removed From Parts Stock Certain Engine Software Needs To Be Removed From Parts Stock
Rear Accessory Drive Thrust Washer May Be Missing On Certain 3508, 3512, 3516 And 3516B Engines, 777C, 777D, 785B, 789B And 793C Trucks And D11R Tractors Rear Accessory Drive Thrust Washer May Be Missing On Certain 3508, 3512, 3516 And 3516B Engines, 777C, 777D, 785B, 789B And 793C Trucks And D11R Tractors
Product Support Program For Replacing The Fuel Tank Mount On Certain D250E And D300E Articulated Trucks Product Support Program For Replacing The Fuel Tank Mount On Certain D250E And D300E Articulated Trucks
The Air Conditioning System Needs To Be Reworked To Prevent Excessive Condensation From Collecting In The Drain Pan On Certain 416C, 426C, 436C, 428C And 438C Backhoe Loaders The Air Conditioning System Needs To Be Reworked To Prevent Excessive Condensation From Collecting In The Drain Pan On Certain 416C, 426C, 436C, 428C And 438C Backhoe Loaders
Inspection And Replacement Of Connecting Rods In Certain 3508, 3512, And 3516 Diesel Engines, And G3508, G3512, And G3516 Gas Engines, And 777D Trucks Inspection And Replacement Of Connecting Rods In Certain 3508, 3512, And 3516 Diesel Engines, And G3508, G3512, And G3516 Gas Engines, And 777D Trucks
Product Improvement Program For Inspecting The Final Drive Planet Gear Shaft On Certain Challenger 35, 45, And 55 Tractors Product Improvement Program For Inspecting The Final Drive Planet Gear Shaft On Certain Challenger 35, 45, And 55 Tractors
New Fuel Filter Assembly For 3516 Engines Used In 5230 Excavators And 3516 Remanufactured Engines New Fuel Filter Assembly For 3516 Engines Used In 5230 Excavators And 3516 Remanufactured Engines
New Double Check Valve Needs To Be Installed On Certain 777D, 784B, 785, 785B, 789, 789B, 793, 793B, And 793C Trucks New Double Check Valve Needs To Be Installed On Certain 777D, 784B, 785, 785B, 789, 789B, 793, 793B, And 793C Trucks
The Rotor Transmission ; Rotor Axle Lube System In-Line Strainer Filters And The Fill And Drain Port Nipples May Fail Due To Vibration On RR-250 And RR-250B Reclaimers And On SS-250 And SS-250B Stabilizers The Rotor Transmission & Rotor Axle Lube System In-Line Strainer Filters And The Fill And Drain Port Nipples May Fail Due To Vibration On RR-250 And RR-250B Reclaimers And On SS-250 And SS-250B Stabilizers
Asphalt Emulsion Spray System - Pull-Up Resistor Needs To Be Replaced On Certain RR-250, RR-250B, And RM-350 Reclaimer Mixers Asphalt Emulsion Spray System - Pull-Up Resistor Needs To Be Replaced On Certain RR-250, RR-250B, And RM-350 Reclaimer Mixers
Implement Coupler Load Check Valves On Certain Challenger 35, 45, And 55 Agricultural Tractors Implement Coupler Load Check Valves On Certain Challenger 35, 45, And 55 Agricultural Tractors
Service Letter Cancellation Service Letter Cancellation
Service Letter Cancellation Service Letter Cancellation
Product Support Program For Replacing The Shock Absorber On The Air Suspension Seat Damper That May Leak Oil On Certain 769D, 771D, 773D, 775D, 776D, 777D And 793D Trucks Product Support Program For Replacing The Shock Absorber On The Air Suspension Seat Damper That May Leak Oil On Certain 769D, 771D, 773D, 775D, 776D, 777D And 793D Trucks
The Drive Shaft Bolts May Loosen And Need To Be Replaced On Certain 416C, 426C, 428C, 436C And 438C Backhoe Loaders The Drive Shaft Bolts May Loosen And Need To Be Replaced On Certain 416C, 426C, 428C, 436C And 438C Backhoe Loaders
Service Letter Cancellation Service Letter Cancellation
The 5P9736 Link Brackets Used On Platforms As A Lifting Device May Be Cracked And Need To Be Replaced With New 1387575 Link Brackets On Certain 793C Trucks The 5P9736 Link Brackets Used On Platforms As A Lifting Device May Be Cracked And Need To Be Replaced With New 1387575 Link Brackets On Certain 793C Trucks
Product Support Program For Reworking The Fixed Axle Which May Have Been Assembled With Incorrect Sun Shafts On Certain 816F Compactors Product Support Program For Reworking The Fixed Axle Which May Have Been Assembled With Incorrect Sun Shafts On Certain 816F Compactors
New Axle Pins Need To Be Installed In Certain 12H, 120H, 135H, 140hH 143H, And 160H Motor Graders New Axle Pins Need To Be Installed In Certain 12H, 120H, 135H, 140hH 143H, And 160H Motor Graders
Product Support Program For Repairing Front Suspension Cylinder Leaks On Certain D250E And D300E Articulated Trucks Product Support Program For Repairing Front Suspension Cylinder Leaks On Certain D250E And D300E Articulated Trucks
The EPTC-II Controls Need To Be Replaced On 793C Trucks The EPTC-II Controls Need To Be Replaced On 793C Trucks
Product Support Program For Cutting A Hole In The 118-4629 Hood Assembly For Air Cleaner Dust Valve Access Product Support Program For Cutting A Hole In The 118-4629 Hood Assembly For Air Cleaner Dust Valve Access
Product Support Program For Installing 1487160 Acorn Nuts To Protect The Radiator Air Seal Of Certain PS-150B And PS-200B Compactors Product Support Program For Installing 1487160 Acorn Nuts To Protect The Radiator Air Seal Of Certain PS-150B And PS-200B Compactors