Pressure Gauge Faces With Tonnage Scales Available For Caterpillar Service Tool Manual And Electric Hydraulic Pumps{0615,0616,0799}
Usage:
The dual scale gauge faces on 8T814 and 8T820 Gauges can be replaced with gauge faces having the same colored tonnage scales as the former 9S2239 and 9S2240 Gauges.
In the United States, the fee for changing the gauge face on either the 8T814 or 8T820 Gauge is $20.00 plus shipping (gauges must be removed from pumps). Send a purchase order along with the gauge to.
16965 Vincennes Avenue
P. O. Box 40
South Holland, Illinois 60473
Phone: (312) 339-8200
Repair services are available worldwide through Wika distributors.
New gauges with tonnage scales will be available in 1986.
Caterpillar Information System:
1985/12/16 Bushing Kits Available For Crankshaft Pulleys{1205}
1985/12/16 Crankshaft Seal Usage On 3400 Series Engines{1160,1161}
1985/12/16 Gasket Leakage On Aftermarket Fuel Filters{1261}
1985/12/16 Use Care When Handling Turbocharger Compressor Wheels{1052,1077}
1985/12/16 Troubleshooting Of Jacket Water Heaters{1383}
1985/12/09 New, Tougher Gasket Used Between Block And Front Housing{1151,7555}
1985/12/09 Improved Adjustment Procedure For Blade Rail Wear Strips{6151,6174}
1985/12/09 Use Rotating Torque To Check Final Drive And Wheel Bearing Adjustment{4151,4050}
1985/12/09 New Ratchet Wrenches Available For Tube Fittings{0600}
1985/11/25 Canister Size Of Coolant Conditioner Element Has Changed{1350}
1985/11/25 Improved Bearing Retention In Planetary Group{3150}
1985/11/25 New Duo-Cone Seal Groups Used in Service and Parking Brake Groups{4251,7561}
1986/01/13 How To Use Temperature And Pressure Probes With Self-Sealing Probe Adapter Groups{0760,0784}
1986/01/13 Fuel Sulfur Analyzer Available{0651,1280,1318}
1986/01/13 Repair Of Speed Sensor Harness On Electronically Controlled Transmissions{3168,3175}
1986/01/13 New Parking Brake Valve And Drain Lines Eliminate Seal Leaks{4282}
1986/01/13 New Muffler Clamp Used To Hold The Muffler To The Exhaust Pipe{1061,1062}
1986/01/13 Round Air Cleaner Inlet Adapter Available{1051}
1986/01/13 Lubricate Clamp When Installing Unit Injector Assemblies{1290}
1986/01/13 Put Grease On Front Crankshaft Seal Before Installing The Crankshaft Pulley And Damper{1160}
1986/01/13 Higher Oil Level Required In Transmission Sump{3177,3153,3150,3179}
1986/01/13 Checking Or Adjusting Valve Clearances{1105,1208,1123}
1986/01/20 Padlock Covers Keep Out Debris{7315,7300}
1986/01/20 Oil Total Base Number (TBN) Test Kit Available{1300}