Lubricate Clamp When Installing Unit Injector Assemblies{1290}
Usage:
3500 Series Engines
Be sure to lubricate the contact surface between the 8N8069 Clamp and 8N9944 Plug with engine oil before installing the clamp that holds the unit injector in place. This helps the clamp center itself and prevents binding between the injector assembly and cylinder head bore. Tighten the retainer bolt to 65 ± 7 N·m (48 ± 5 lb ft).
Make note of this information in the appropriate locations in the Disassembly and Assembly section of the Service Manual.
Location to lubricate when installing the unit injector.
Caterpillar Information System:
1986/01/13 Round Air Cleaner Inlet Adapter Available{1051}
1986/01/13 New Muffler Clamp Used To Hold The Muffler To The Exhaust Pipe{1061,1062}
1986/01/13 New Parking Brake Valve And Drain Lines Eliminate Seal Leaks{4282}
1986/01/13 Repair Of Speed Sensor Harness On Electronically Controlled Transmissions{3168,3175}
1986/01/13 Fuel Sulfur Analyzer Available{0651,1280,1318}
1986/01/13 How To Use Temperature And Pressure Probes With Self-Sealing Probe Adapter Groups{0760,0784}
1985/12/16 Pressure Gauge Faces With Tonnage Scales Available For Caterpillar Service Tool Manual And Electric Hydraulic Pumps{0615,0616,0799}
1985/12/16 Bushing Kits Available For Crankshaft Pulleys{1205}
1985/12/16 Crankshaft Seal Usage On 3400 Series Engines{1160,1161}
1985/12/16 Gasket Leakage On Aftermarket Fuel Filters{1261}
1985/12/16 Use Care When Handling Turbocharger Compressor Wheels{1052,1077}
1985/12/16 Troubleshooting Of Jacket Water Heaters{1383}
1986/01/13 Put Grease On Front Crankshaft Seal Before Installing The Crankshaft Pulley And Damper{1160}
1986/01/13 Higher Oil Level Required In Transmission Sump{3177,3153,3150,3179}
1986/01/13 Checking Or Adjusting Valve Clearances{1105,1208,1123}
1986/01/20 Padlock Covers Keep Out Debris{7315,7300}
1986/01/20 Oil Total Base Number (TBN) Test Kit Available{1300}
1986/01/27 Uprated 3500 Series Engines Now Available{1000}
1986/01/27 Stronger Cylinder Heads Used{1100}
1986/01/27 Uprated 3500 Series Engines Use Stronger Pistons, New Connecting Rods And New Piston Pins{1214,1218,1225}
1986/01/27 Engines Use New Pistons, Connecting Rods And Piston Pins{1214,1218,1225}
1986/01/27 Linkage-To-Pin Clearance Has Been Reduced In Implement Control Group Linkage{6129}
1986/01/27 New Service Tools Available{0600}
1986/01/27 Positioner And Kickout Group Improved{5109,5112,5100}