Keep Alternators Without Pulleys In A Horizontal Position During Installation To Prevent Internal Damage{1405}
Usage:
Caterpillar Engines Equipped With 6T1193, 6T1194, 6T1195, 6T1196, 3T8753 Alternators
Shipment of the above alternators is made with a temporary spacer where the pulley normally fits. The spacer prevents movement of internal parts during shipment. After removal of the spacer, and before assembly of the pulley, do not put the alternator in a vertical position. With the alternator in a vertical position, it is possible for the rotor to move down and cause damage to the rotor or other internal parts.
The pulley must be assembled with the rotor in a horizontal position, not vertical. Correct assembly of the pulley puts the rotor in the correct position and prevents damage to internal parts.
Caterpillar Information System:
1983/08/15 Transmission Neutralizer Can Now Be Adjusted From Inside The Cab{3150,3181}
1983/08/15 Recommendations For Use Of 6V6125 Infrared Thermometer{0651}
1983/08/15 New Liner Seat Insert Available{1217}
1983/08/15 Information For Repair Of Hydraulic Fuel Ratio Controls{1278}
1983/08/15 Latch Kit Available For Repair Of Seat Cushion{7312}
1983/08/15 Stick Cylinder Rod Will Not Move In Fully Retracted Position; Cylinder Rod Has New Design{5458}
1983/08/15 New Service Tools Available{0600}
1983/08/08 New Procedure And New Tool Can Be Used To Remove Cylinder Sleeves From The Cylinder Block{1222,1223}
1983/08/08 New Duo-Cone Seals In Rear Brake Group Have Steel Seal Rings{4208}
1983/08/08 Special Instruction Has Repair Procedure For 6V4060 Engine Set Point Indicator Group{0651}
1983/08/08 Hydraulic Boring Machine Available{0664}
1983/08/08 New 6V7070 And 6V7800 Digital Multimeters Available{0651}
1983/08/15 Repair Of Damaged Threads{0660}
1983/08/15 Recommendations To Avoid Piston Seizures{1214,1213,1215}
1983/08/15 Digital Tachometer Available{7462}
1983/08/15 3512 Generator Set Engines (1500 And 1800 RPM) Must Use Flywheel Balance Weights{1156}
1983/08/15 Different Discs And Thrower Used In Flywheel Clutch Group To Prevent Damage From Heat{3052}
1983/08/15 New Bolts And Axle Housings Used{3260}
1983/08/15 Troubleshooting Engine Vibration; Damper Adapter Can Be Changed{1205,1000}
1983/08/15 New Fuel Ratio Control Group Has Improved Diaphragm{1278,1257,1251}
1983/08/15 New Water Seals Used In Cylinder Head Groups{1115,1101}
1983/08/15 Replacement Parts And Service For 6V3021 Crimping Tool And 6V3022 Cable Cutter{0610}
1983/08/22 New Differential Pinion And Ring Gear Make Less Noise{3280}
1983/08/22 Improved Voltage Regulator Assembly Now Used{4450,4467}