1983/05/09 Caterpillar


New Air Compressor Tube Assembly Is Easier To Install Or Remove{1803,5502}

Usage:


120G, 130G, 140G, 12G, 14G Motor Graders;
920, 930, 950 Loaders;
518, 528 Skidders;
518 Grapple Skidders

Description of Change: A new tube assembly and connector are now used in the air compressor lines groups on the above machines. The new tube assembly, which is connected to the air compressor and the oil cooler, has a different shape. The change in the shape of the tube assembly makes it easier to install or remove it.

Adaptable As: The new parts are direct replacements for the former parts as shown in the chart.

Caterpillar Information System:

1983/05/09 New Lower Radiator Hose{1380,1353}
1983/05/09 Installation Of Bearing For Connecting Rod Piston Pin{1219}
1983/05/09 New Fuel Nozzle Adapters Used{1106}
1983/05/09 New Turbocharger Has Thicker Mounting Flange To Prevent Breakage{1052}
1983/05/09 Change 6V3060 EGR Testers To LES Testers{0651,1080}
1983/05/09 Change Made To FT1535 Idler Bearing Puller{0621,4167}
1983/05/09 Modification To Swivel Group Permits Use Of Lip-Type Seal{5060}
1983/05/09 New Service Tools Available{0600}
1983/04/25 New Gasket And Cover Used On Governors{1264}
1983/04/25 Larger Literature Compartment Used{0375,7323,7325}
1983/04/25 Breather Now Made Of Steel Instead Of Plastic{5163,4059,4114,3154,4003}
1983/04/25 Valve Spring Retainers Now Have Thicker Flanges{1108}
1983/05/09 New Fuel Setting Information{0374,1257,1286}
1983/05/09 New Piston Ring Group Available For Higher Horsepower Applications{1215,1214,1213,1226}
1983/05/16 New Specification For Clearance Between Fuel Rack Slot And Cross Link{1257}
1983/05/16 Use Care During Removal Of The Oil Line Screen For Brake And Torque Converter Oil Cooler{1307,1366,0374}
1983/05/16 New Planet Carrier Shafts And Pins For Transmission{3150}
1983/05/16 Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16 Selection Of The Correct Battery For Use With Diagnostic Tools{1401,0650}
1983/05/16 Installation Procedure For Seals On Cab Doors{7308}
1983/05/16 Reuse Of Engine Bearings{1230}
1983/05/23 New Core Assembly Used In Transmission Oil Cooler{1375}
1983/05/23 Use The 6V4930 Battery Load Tester To Test Batteries{0651}
1983/05/23 Anti-Spin Control Available To Improve Traction{4250,4001}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.