1982/09/06 Caterpillar


Vacuum Tester Checks For Leaks Between Valve Face and Seat{0651,1103,1105}

Usage:


The FT1741 Vacuum Tester can be used to check for leaks between the valve face and the seat on cylinder heads.

The vacuum tester can be used after the valves and seats are ground and the valve springs are assembled. To use the tester attach the correct adapter to the vacuum pump handle. With the vacuum pump on, place the adapter over the valve. Make sure that the adapter seal is in full contact with the combustion surface of the cylinder head. If the gauge shows less than 68 kPa (20 inches Hg) vacuum, the seal is not good. Tap the stem of the valve with a soft tip hammer and test again. If the gauge shows a wrong reading a second time regrind the valve face and seat.


The FT1741 Vacuum Tester can be used to check all cylinder heads.

Caterpillar Information System:

1982/08/30 Make Sure Generator Leads Do Not Move Against Frame{4459}
1982/08/30 New Radiator Core Assembly Has Full-Frame Reinforcement Plate For Longer Service Life{1353}
1982/08/30 Added Methods To Decrease The Effects Of High Sulfur Fuels{1355,1280,1318,1000}
1982/08/23 New Time Delay Conversion Groups Available{7400}
1982/08/23 Repair Kit For The 5P9700 Hose Cutter Is Available{0623,1380}
1982/08/23 New Mechanical Switches Are Available For Parts Service{7332,1400}
1982/08/23 Increased Torque Values For Hardware In Service And Parking Brake Groups{4251,4267}
1982/08/23 Parts Service Identification Of O-Ring Seal Used In Dry Chemical Agent Valve And Cylinder Group{7401}
1982/08/23 New Thrust Washer Can Prevent Wrong Oil Sample Readings{1102}
1982/08/16 Output Transfer Gear Case Bearings Have More Capacity{3159,3176}
1982/08/16 Lubrication Of Input Shaft Bearings In Final Drive{4091}
1982/08/16 New Latch Used In Cab Door Groups{7308}
1982/09/06 Repair Kits For Service Brakes Now Available{4260,4261,4262,4251}
1982/09/06 Adapter And Seal Guide Make Assembly Of Water Pumps Easier{0622,1361}
1982/09/06 New Water Pump Uses New Seal And Impeller{1361}
1982/09/06 Improved Inlet And Exhaust Valves{1105}
1982/09/06 Reusability Of Camshaft Rollers And Roller Followers{1209,1210}
1982/09/06 New Instruction Card Available For 6V87 Valve Stem Gauge{0653}
1982/09/06 New Shims Available To Make Drawbar Wear Strips Level{6153}
1982/09/13 Different Nuts And Washers, Increased Torque Prevent Loose Pistons, Broken Bolts In Suspension Cylinders {7201}
1982/09/13 New Bearing Used In Air Starting Motor {1451}
1982/09/13 New Pinion Used In Transfer Gear Group For Power Shift Transmissions {3159}
1982/09/13 Two Oil Change Kits Have Oil Filters, Cooling System Conditioner {1318,1350}
1982/09/13 New Water Pumps Use New Seal And Impeller {1361}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.