Make Sure Generator Leads Do Not Move Against Frame{4459}
Usage:
All Brushless SR-4 Generators
The main output leads (wires) on generators are in a loose condition when the generator is sent from the factory. These leads must be separated and put in the correct position during installation of the generator by the serviceman. After installation of the leads, the serviceman must make sure these leads are held in place so they do not move against the frame. Movement against the frame can wear away the insulation on the leads. This can cause an electrical short and damage the generator leads.
If desired rubber hose can be put around the opening in the frame to prevent this problem. Make sure there is no metal reinforcement in the hose.
Caterpillar Information System:
1982/08/30 New Radiator Core Assembly Has Full-Frame Reinforcement Plate For Longer Service Life{1353}
1982/08/30 Added Methods To Decrease The Effects Of High Sulfur Fuels{1355,1280,1318,1000}
1982/08/23 New Time Delay Conversion Groups Available{7400}
1982/08/23 Repair Kit For The 5P9700 Hose Cutter Is Available{0623,1380}
1982/08/23 New Mechanical Switches Are Available For Parts Service{7332,1400}
1982/08/23 Increased Torque Values For Hardware In Service And Parking Brake Groups{4251,4267}
1982/08/23 Parts Service Identification Of O-Ring Seal Used In Dry Chemical Agent Valve And Cylinder Group{7401}
1982/08/23 New Thrust Washer Can Prevent Wrong Oil Sample Readings{1102}
1982/08/16 Output Transfer Gear Case Bearings Have More Capacity{3159,3176}
1982/08/16 Lubrication Of Input Shaft Bearings In Final Drive{4091}
1982/08/16 New Latch Used In Cab Door Groups{7308}
1982/08/16 Modification Of 2P8315 Bracket Assembly{0652,1286}
1982/09/06 Vacuum Tester Checks For Leaks Between Valve Face and Seat{0651,1103,1105}
1982/09/06 Repair Kits For Service Brakes Now Available{4260,4261,4262,4251}
1982/09/06 Adapter And Seal Guide Make Assembly Of Water Pumps Easier{0622,1361}
1982/09/06 New Water Pump Uses New Seal And Impeller{1361}
1982/09/06 Improved Inlet And Exhaust Valves{1105}
1982/09/06 Reusability Of Camshaft Rollers And Roller Followers{1209,1210}
1982/09/06 New Instruction Card Available For 6V87 Valve Stem Gauge{0653}
1982/09/06 New Shims Available To Make Drawbar Wear Strips Level{6153}
1982/09/13 Different Nuts And Washers, Increased Torque Prevent Loose Pistons, Broken Bolts In Suspension Cylinders {7201}
1982/09/13 New Bearing Used In Air Starting Motor {1451}
1982/09/13 New Pinion Used In Transfer Gear Group For Power Shift Transmissions {3159}
1982/09/13 Two Oil Change Kits Have Oil Filters, Cooling System Conditioner {1318,1350}