New Gasket Used On Oil Regulator Housing
Usage:
3600 Family Of Engines
Description of Change: A new gasket is used on the oil temperature regulator housing on 3600 family of Engines. The new gasket is made of a new material which will allow uniform compressive loading and help prevent leakage. See the illustration for gasket location.
Location of gasket.
Adaptable To: The new 9Y9842 Gasket is a direct replacement for the former 7W3554 Gasket which has been canceled.
Caterpillar Information System:
1989/09/01 New Seal Group Used In Water Pump Group
1989/09/01 Spindle In Centrifugal Lube Filter Group Now Serviced As Part Of Body Assembly
1989/09/01 New Collar Used In Fuel Injection Control Groups
1989/09/01 Additional Clamp Added To Aftercooler Water Line
1989/09/01 New Design Alternator Belt Used
1989/09/01 New Engine Oil Cooler Core Groups With Rubber End Sheets Used
1989/09/01 New Fuel Injectors Available For Parts Service
1989/09/01 Tightening Procedure For Turbocharger Compressor Nut
1989/09/01 Be Sure To Tighten Fuel Injection Line Clamps To The Correct Torque
1989/09/01 Plasma Top Piston Rings Replace Chrome Rings
1989/09/01 New Connecting Rod Bearing Used
1989/08/01 Worldwide Service Directories Available For Marine, Petroleum, Power Generation Products
1989/09/01 Procedure To Wash Turbochargers On Engines Powered By Residual Fuel
1989/09/01 List of Service Publications
1989/10/01 New Service Tools Available
1989/10/01 Setting The Governor Load Stop Output Dimension For More Than 9.00 mm
1989/10/01 New Fuel Injector Assemblies Used
1989/10/01 Fuel Injector Reference For 3500 Family of Engines
1989/10/01 Improved Turbocharger Outlet Gasket
1989/10/01 Improved Support Assembly Used In Water Lines Group
1989/10/01 Cleaning Instructions For Intake Air Filters In Silencer Group
1989/11/01 Engine Coolant Can Be Recycled
1989/11/01 New Service Tools Available
1989/11/01 Use Correct Calibration Pin (1U9786) When Calibrating Governor; Do Not Use 1U7305 Insertion Tool