New Service Tools Available
Usage:
The chart shows new tools available from Caterpillar. More detailed information is given in the Tool Announcement for each tool. The Tool Announcements have been distributed and a copy should be filed in the Tool Guide.
Some tools have a Special Instruction or Operating Manual that shows how to use the tool. If available, the form number is shown in the last column of the chart along with the Tool Announcement form number.
Dealers in NACD, COSA and Caterpillar Americas can order drawings of Fabricated Tools (FT) from the address that follows. When ordering, be sure to include your dealer code and address so your request will receive immediate attention. All other dealers can order drawings from their Subsidiary Service Departments.
AD180 Publications Print Room
600 West Washington Street
East Peoria, IL 61630-0371 (U.S.A.)
Phone: 309-675-7292
Facsimile: 309-675-9773
Telex: TRT 190425
Caterpillar Information System:
1989/11/01 Engine Coolant Can Be Recycled
1989/10/01 Cleaning Instructions For Intake Air Filters In Silencer Group
1989/10/01 Improved Support Assembly Used In Water Lines Group
1989/10/01 Improved Turbocharger Outlet Gasket
1989/10/01 Fuel Injector Reference For 3500 Family of Engines
1989/10/01 New Fuel Injector Assemblies Used
1989/10/01 Setting The Governor Load Stop Output Dimension For More Than 9.00 mm
1989/10/01 New Service Tools Available
1989/09/01 List of Service Publications
1989/09/01 Procedure To Wash Turbochargers On Engines Powered By Residual Fuel
1989/09/01 New Gasket Used On Oil Regulator Housing
1989/09/01 New Seal Group Used In Water Pump Group
1989/11/01 Use Correct Calibration Pin (1U9786) When Calibrating Governor; Do Not Use 1U7305 Insertion Tool
1989/11/01 Hand Tool List For 3114 And 3116 Engines
1989/11/01 Two Remote Instrument Panels Available: Conventional and EMCP
1989/11/01 New Connecting Rod and Main Bearing Kits Available
1989/11/01 New MG507 And MG507A Marine Gear Groups; New Marine Transmission Mounting Group
1989/11/01 How to Prevent Exhaust Valve Failures on D348 Engines
1989/11/01 Exhaust Manifold Gasket Removed From Between Exhaust Sleeve And Manifold Section.
1989/11/01 New Crankshaft Counterweight Bolt And Washer Used
1989/11/01 New Spacer Used In Attachment Alternator Belt Guard Group
1989/11/01 New Shaft Assembly And Lever Assembly Used In Air Shut-Off Group
1989/11/01 Different Thread Lubricant Can Be Used On Connecting Rod, Main Bearing Cap And Counterweight Bolts
1989/11/01 New Water Level Gauge Group For Folded Core Radiators