New Water Level Gauge Group For Folded Core Radiators
Usage:
3500 Family Of Industrial And Generator Set Engines
Description of Change: The new water level gauge group for folded core radiators is mounted in a different location. The switch is mounted behind the top tank rather than to the side. This allows easier access to the gauge for reading.
Adaptable To: The new 9Y7579 and 9Y7695 Water Level Gauge Groups are a direct replacement for the former 7W9698 Water Level Gauge Group which has been canceled. The chart identifies which water level gauge group to use with each radiator group.
9Y7579 Gauge Group.
Caterpillar Information System:
1989/11/01 Different Thread Lubricant Can Be Used On Connecting Rod, Main Bearing Cap And Counterweight Bolts
1989/11/01 New Shaft Assembly And Lever Assembly Used In Air Shut-Off Group
1989/11/01 New Spacer Used In Attachment Alternator Belt Guard Group
1989/11/01 New Crankshaft Counterweight Bolt And Washer Used
1989/11/01 Exhaust Manifold Gasket Removed From Between Exhaust Sleeve And Manifold Section.
1989/11/01 How to Prevent Exhaust Valve Failures on D348 Engines
1989/11/01 New MG507 And MG507A Marine Gear Groups; New Marine Transmission Mounting Group
1989/11/01 New Connecting Rod and Main Bearing Kits Available
1989/11/01 Two Remote Instrument Panels Available: Conventional and EMCP
1989/11/01 Hand Tool List For 3114 And 3116 Engines
1989/11/01 Use Correct Calibration Pin (1U9786) When Calibrating Governor; Do Not Use 1U7305 Insertion Tool
1989/11/01 New Service Tools Available
1989/11/01 New 3161 Marine Governor Provides Better Low Idle Stability
1989/11/01 New Gasket With Stainless Steel Flange Used In Exhaust Manifold Group
1989/11/01 Cylinder Liner Changes
1989/11/01 New Nut For Lifting Eye Bracket
1989/12/01 4C4213 Insulation Tester for Electrical Power Generation
1989/12/01 New Camshaft And Lifter Kits Available For Slipper Type Cam Followers (Valve Lifters)
1989/12/01 Additional Information For Checking Valve Camshaft Timing
1989/12/01 Modification Of 2W1054 Screen Assembly For Use During Dynamometer Testing
1989/12/01 New Flanges Used And Gaskets Added To Water Cooled Turbocharger Exhaust Connections
1989/12/01 Spark Plug Gasket Available
1989/12/01 New Spark Plug Used In Ignition Groups
1989/12/01 Cooling System Drain Valves Available