1989/12/01 Caterpillar


4C4213 Insulation Tester for Electrical Power Generation

Usage:


All Caterpillar Generator Sets

Reference: Operating Manual For 4C4213 Insulation Tester, Form NEHS0528.

The 4C4213 Insulation Tester is used as an installation, preventive maintenance, and repair tool for checking winding insulation on EPG sets built by Caterpillar.

Important features of the 4C4213 Insulation Tester are:

... Battery powered, hand-held, in rugged plastic case.
... Gives a direct digital readout of the measurement.
... Capable of functioning as a continuity tester with an audible tone, a voltmeter with a range of 500V, and an ohmmeter that measures insulation resistance in megohms.
... Has a warning indicator that gives a visual indication if connected to a live circuit.
... Power supplied by a single 9V Battery.
... Automatically turns off after one hour, if left unattended.


1. 4C4213 Insulation Tester. 2. 4C4443 Test Lead Set. 3. 4C4214 Case (Not Shown)

Caterpillar Information System:

1989/11/01 New Nut For Lifting Eye Bracket
1989/11/01 Cylinder Liner Changes
1989/11/01 New Gasket With Stainless Steel Flange Used In Exhaust Manifold Group
1989/11/01 New 3161 Marine Governor Provides Better Low Idle Stability
1989/11/01 New Water Level Gauge Group For Folded Core Radiators
1989/11/01 Different Thread Lubricant Can Be Used On Connecting Rod, Main Bearing Cap And Counterweight Bolts
1989/11/01 New Shaft Assembly And Lever Assembly Used In Air Shut-Off Group
1989/11/01 New Spacer Used In Attachment Alternator Belt Guard Group
1989/11/01 New Crankshaft Counterweight Bolt And Washer Used
1989/11/01 Exhaust Manifold Gasket Removed From Between Exhaust Sleeve And Manifold Section.
1989/11/01 How to Prevent Exhaust Valve Failures on D348 Engines
1989/11/01 New MG507 And MG507A Marine Gear Groups; New Marine Transmission Mounting Group
1989/12/01 New Camshaft And Lifter Kits Available For Slipper Type Cam Followers (Valve Lifters)
1989/12/01 Additional Information For Checking Valve Camshaft Timing
1989/12/01 Modification Of 2W1054 Screen Assembly For Use During Dynamometer Testing
1989/12/01 New Flanges Used And Gaskets Added To Water Cooled Turbocharger Exhaust Connections
1989/12/01 Spark Plug Gasket Available
1989/12/01 New Spark Plug Used In Ignition Groups
1989/12/01 Cooling System Drain Valves Available
1989/12/01 Improved Turbocharger Wash Water Lines Group Available On Engines Powered By Residual (Heavy) Fuel
1989/12/01 List of Service Publications
1990/01/01 New Seal Group Used In Seawater Pump
1990/01/01 Paper Liner Available For Centrifugal Oil Filters
1990/01/01 Improved Gaskets And Covers Used In Cover Groups, Connection Group And Water Lines Groups; New Clips Used In Water Lines Groups
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.