1989/11/01 Caterpillar


New Gasket With Stainless Steel Flange Used In Exhaust Manifold Group

Usage:


3516 Locomotive Engines

Description of Change: A new gasket is used between the flanges of the manifolds and the bellow assemblies. The new gasket has a stainless steel wrap on the inner side towards the exhaust gases. The stainless steel wrap shields the gasket material from the hot exhaust gases and provides additional thickness to improve sealing.

Adaptable To: The new 7E5261 Exhaust Manifold Gasket is a direct replacement for the former 7W8146 Exhaust Manifold Gasket which has been canceled. The new gasket is effective with 3516 Engine 9KF48.


Location of gasket (typical example).

Caterpillar Information System:

1989/11/01 New 3161 Marine Governor Provides Better Low Idle Stability
1989/11/01 New Water Level Gauge Group For Folded Core Radiators
1989/11/01 Different Thread Lubricant Can Be Used On Connecting Rod, Main Bearing Cap And Counterweight Bolts
1989/11/01 New Shaft Assembly And Lever Assembly Used In Air Shut-Off Group
1989/11/01 New Spacer Used In Attachment Alternator Belt Guard Group
1989/11/01 New Crankshaft Counterweight Bolt And Washer Used
1989/11/01 Exhaust Manifold Gasket Removed From Between Exhaust Sleeve And Manifold Section.
1989/11/01 How to Prevent Exhaust Valve Failures on D348 Engines
1989/11/01 New MG507 And MG507A Marine Gear Groups; New Marine Transmission Mounting Group
1989/11/01 New Connecting Rod and Main Bearing Kits Available
1989/11/01 Two Remote Instrument Panels Available: Conventional and EMCP
1989/11/01 Hand Tool List For 3114 And 3116 Engines
1989/11/01 Cylinder Liner Changes
1989/11/01 New Nut For Lifting Eye Bracket
1989/12/01 4C4213 Insulation Tester for Electrical Power Generation
1989/12/01 New Camshaft And Lifter Kits Available For Slipper Type Cam Followers (Valve Lifters)
1989/12/01 Additional Information For Checking Valve Camshaft Timing
1989/12/01 Modification Of 2W1054 Screen Assembly For Use During Dynamometer Testing
1989/12/01 New Flanges Used And Gaskets Added To Water Cooled Turbocharger Exhaust Connections
1989/12/01 Spark Plug Gasket Available
1989/12/01 New Spark Plug Used In Ignition Groups
1989/12/01 Cooling System Drain Valves Available
1989/12/01 Improved Turbocharger Wash Water Lines Group Available On Engines Powered By Residual (Heavy) Fuel
1989/12/01 List of Service Publications
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.