New Service Tools Available
Usage:
The chart shows new tools available from Caterpillar. More detailed information is given in the Tool Announcement for each tool. The Tool Announcements have been distributed and a copy should be filed in the Tool Guide.
Some tools have a Special Instruction that shows how to use the tool. If available, the Special Instruction Form Number is shown in the last column of the chart along with the Tool Announcement form number.
Dealers in NACD, COSA and Caterpillar Americas can order drawings of Fabricated Tools (FT) from the address that follows. When ordering, be sure to include your dealer code and address so your request will receive immediate attention. All other dealers can order drawings from their Subsidiary Service Departments.
AD180 Publications Print Room
600 West Washington Street
East Peoria, IL 61630-0371 (U.S.A.)
Phone: 309-675-7292
Facsimile: 309-675-9773
Telex: TRT 190425
Caterpillar Information System:
1989/09/01 List of Service Publications
1989/09/01 Procedure To Wash Turbochargers On Engines Powered By Residual Fuel
1989/09/01 New Gasket Used On Oil Regulator Housing
1989/09/01 New Seal Group Used In Water Pump Group
1989/09/01 Spindle In Centrifugal Lube Filter Group Now Serviced As Part Of Body Assembly
1989/09/01 New Collar Used In Fuel Injection Control Groups
1989/09/01 Additional Clamp Added To Aftercooler Water Line
1989/09/01 New Design Alternator Belt Used
1989/09/01 New Engine Oil Cooler Core Groups With Rubber End Sheets Used
1989/09/01 New Fuel Injectors Available For Parts Service
1989/09/01 Tightening Procedure For Turbocharger Compressor Nut
1989/09/01 Be Sure To Tighten Fuel Injection Line Clamps To The Correct Torque
1989/10/01 Setting The Governor Load Stop Output Dimension For More Than 9.00 mm
1989/10/01 New Fuel Injector Assemblies Used
1989/10/01 Fuel Injector Reference For 3500 Family of Engines
1989/10/01 Improved Turbocharger Outlet Gasket
1989/10/01 Improved Support Assembly Used In Water Lines Group
1989/10/01 Cleaning Instructions For Intake Air Filters In Silencer Group
1989/11/01 Engine Coolant Can Be Recycled
1989/11/01 New Service Tools Available
1989/11/01 Use Correct Calibration Pin (1U9786) When Calibrating Governor; Do Not Use 1U7305 Insertion Tool
1989/11/01 Hand Tool List For 3114 And 3116 Engines
1989/11/01 Two Remote Instrument Panels Available: Conventional and EMCP
1989/11/01 New Connecting Rod and Main Bearing Kits Available