Procedure to Replace Main Hydraulic Control Valve Gasket on Certain 307.5, 308, and 310 Mini Hydraulic Excavators {5051}
- Mini Hydraulic Excavator
- 307.5 (S/N: GW71-459)
- 308 (S/N: GW81-134)
- 310 (S/N: GWT1-340)
- 308 (S/N: GW81-134)
Reference: Special Instruction , M0103927 , "Procedure to Replace Main Hydraulic Control Valve Gasket on Certain Mini Hydraulic Excavators"
The special instruction referenced above contains information that pertains to the rework procedure for replacing the 562-9526 Gasket of the main hydraulic control valve on the machines listed above.
The new gasket is adaptable to the products within the listed serial numbers.
The special instruction is available through the normal literature distribution system. The publication can also be found on the Caterpillar Service Information System (SIS).
Caterpillar Information System:
Procedure to Install Fixed Boom Secondary Auxiliary Lines for 307.5 Mini Hydraulic Excavators {5057} Procedure to Install Fixed Boom Secondary Auxiliary Lines for 307.5 Mini Hydraulic Excavators {5057}
Installation Procedure for 561-8199 Auxiliary Lines Kit on Certain 310 Mini Hydraulic Excavators {5057} Installation Procedure for 561-8199 Auxiliary Lines Kit on Certain 310 Mini Hydraulic Excavators {5057}
Installation Procedure for Auxiliary Lines Kit on Certain 308 Mini Hydraulic Excavators {5057} Installation Procedure for Auxiliary Lines Kit on Certain 308 Mini Hydraulic Excavators {5057}
New Software is Now Available for all Cat® Object Detection and Vision Applications On Certain Cat® Products {7620} New Software is Now Available for all Cat® Object Detection and Vision Applications On Certain Cat® Products {7620}
The XQ425 Trailer May Have Water in the Hubs {6331, 7274} The XQ425 Trailer May Have Water in the Hubs {6331, 7274}
Storage Location for the Bucket Pins Is Now Available for Certain 308 and 309 Mini Hydraulic Excavators {6513} Storage Location for the Bucket Pins Is Now Available for Certain 308 and 309 Mini Hydraulic Excavators {6513}
Crankshaft Seal Installation {1160, 1161} Crankshaft Seal Installation {1160, 1161}
Tilt Rotator Control Group Installation Procedure for Certain Mini Hydraulic Excavators {1408, 5705} Tilt Rotator Control Group Installation Procedure for Certain Mini Hydraulic Excavators {1408, 5705}
Coupling Inspection and Replacement on Certain Petroleum Transmissions {3252} Coupling Inspection and Replacement on Certain Petroleum Transmissions {3252}
3512C and 3516C Marine Engines Heat Exchanger - Assemble
3512C and 3516C Marine Engines Heat Exchanger - Disassemble
140 Motor Grader Power Train Front Axle - Remove and Install
A New Factory Process is Now Used on Certain Marine Engines Equipped with Alarm and Protection System {1403, 1906} A New Factory Process is Now Used on Certain Marine Engines Equipped with Alarm and Protection System {1403, 1906}
Fuel Pressure Gauge Test Kit is Now Available for Certain Generator Sets {0782} Fuel Pressure Gauge Test Kit is Now Available for Certain Generator Sets {0782}
Alternator Voltage Change Over and Wiring Configuration/Winding Resistance Data are Now Available for Certain Cat® Retail Generator Sets {1403, 1405} Alternator Voltage Change Over and Wiring Configuration/Winding Resistance Data are Now Available for Certain Cat® Retail Generator Sets {1403, 1405}
NOx Reduction System (NRS) Valve Not Responding on Certain C4.4 and C7.1 Engines {1057, 1082, 108R} NOx Reduction System (NRS) Valve Not Responding on Certain C4.4 and C7.1 Engines {1057, 1082, 108R}
New CAT® WEO Fittings Are Now Available for Certain Mini Hydraulic Excavators {1000, 7000} New CAT® WEO Fittings Are Now Available for Certain Mini Hydraulic Excavators {1000, 7000}
New CAT® WEO Fittings Are Now Available for Certain Mini Hydraulic Excavators {0618, 3016, 4133, 4257, 4304, 5057, 7554} New CAT® WEO Fittings Are Now Available for Certain Mini Hydraulic Excavators {0618, 3016, 4133, 4257, 4304, 5057, 7554}
140 Motor Grader Engine Supplement Belt Tensioner - Remove and Install
140 Motor Grader Engine Supplement Battery - Remove and Install
Loose Wire Strands May Exist at the Lug Crimps on Certain C32 and G3512 Generator Sets {4459} Loose Wire Strands May Exist at the Lug Crimps on Certain C32 and G3512 Generator Sets {4459}
myEquipment to Cat App: Fleet Management Transition Guide {7610, 7620} myEquipment to Cat App: Fleet Management Transition Guide {7610, 7620}
140 Motor Grader Engine Supplement Pressure Sensor (ARD Main Fuel) - Remove and Install
Rework Procedure of a Crack on a 2.9m Stick for Certain 320, 320 GC, and 323 Excavators {6502} Rework Procedure of a Crack on a 2.9m Stick for Certain 320, 320 GC, and 323 Excavators {6502}