New Alternator Group Used In Charging Alternator Groups
Usage:
3204 (2TB, 3PC, 7EB, 6DC),
3208 (90N, 3Z) Industrial Engines
Description of Change: A new alternator is used in the charging alternator groups on the above industrial engines. The former Delco-Remy alternator was discontinued by the manufacturer.
Adaptable As: The new 8T9700 Alternator (Nippon Denso) replaces the former 6T1194 Alternator (Delco-Remy) in the charging alternator groups on the above engines. The chart lists the new and former alternator, the charging alternator groups, the engine models, and engine serial number prefixes. When a new 8T9700 Alternator is used to replace a former 6T1194 Alternator:
-
- ... The wire that was connected to terminal 2 of the former alternator (see the illustration) is not used with the new alternator.
- ... The diode in the line that was connected to terminal 1 of the former alternator (see the illustration) is not required for the new alternator. The new alternator will work with the diode present, but the diode is not needed.
- ... The alternator terminal, identified as "1" in the illustration, is marked "1G" on the new alternator.
- ... The wire that was connected to terminal 2 of the former alternator (see the illustration) is not used with the new alternator.
Starting and charging circuit schematic.
Caterpillar Information System:
1987/10/01 New Product Support Information Available For Electric Power Generation (EPG)
1987/10/01 Piston And Camshaft Changes
1987/09/01 Four More Remanufactured Fuel Pump And Governor Groups Available
1987/09/01 Improved Clutch Piston And Retraction Pins Available
1987/09/01 More Accurate And Easier Method To Adjust 8T1815 Or 6L5438 Main Shaft Bearing
1987/09/01 New Digital Pyrometer Which Incorporates High Exhaust Temperature Alarm Now Used
1987/09/01 Oil Flow Increased For Inlet Valve Lubricator
1987/09/01 Engine Oil Coolers Have Rubber End Sheets In Place Of Brazed Sheets
1987/09/01 New O-Ring Seals Used In Water Lines
1987/09/01 New Turbochargers Have Several Improvements
1987/09/01 Additional Engine Tilt Installation Angles And Engine Dipstick Markings
1987/09/01 Engine Oil Refill Capacity Decreased
1987/10/01 New Hydraulic Steering Mounting Group Available
1987/10/01 Replacement Thermostats Available For Jacket Water Heaters
1987/10/01 Either Type Sleeve Satisfactory For Governor Servo Piston
1987/10/01 Single Lip Hydrodynamic Seal Used In Water Pumps
1987/10/01 New Steel Fuel Injection Pump Lifters Should Not Be Mixed With Aluminum Lifters
1987/11/01 New Service Tools Available
1987/11/01 Parts Information For VR3 Automatic Voltage Regulators
1987/11/01 Check Plastic Water Sleeve If Engine Experiences Severe Overheating
1987/11/01 4N3311 Radiator Cap Has Improved Sealing
1987/11/01 New Air Powered Scraper Available For Gasket Removal
1987/12/01 Oil Pan Size Identification
1987/12/01 Engine Oil Refill Capacity Reduced