PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Caterpillar


Bank Valve - Two

Usage:

PM825 3C6


Illustration 1g06363565

Table 1
Item  Qty  Part  Specification Description 
486-6216 Check Valve As  Installation torque is 80 to 90 N·m (59 to 66 lb ft)
456-1845 Solenoid Valve Gp  Installation torque is 25 to 30 N·m (221 to 266 lb in)
422-8922 Special Nut  Tighten the nut to 6 ± 1 N·m (53 ± 9 lb in)

Caterpillar Information System:

325 Excavator Condenser (Refrigerant) - Clean
325 Excavator Bucket Linkage - Inspect/Adjust
New Seal Installer for Certain Reman Sea Water Pumps is Now Available on Certain C18 Marine Engines {1371} New Seal Installer for Certain Reman Sea Water Pumps is Now Available on Certain C18 Marine Engines {1371}
G3512 Generator Set Engine Throttle Differential Pressure Sensor - Remove and Install
G3512 Generator Set Engine Engine Speed Sensor - Remove and Install
C175 Tier 4 Final Engines for Caterpillar Built Machines Electric Starting Motor - Remove and Install
New Jacket Water Elbow and Adapter are Now Used on Certain Cat® Engines {1355, 1380, 1393} New Jacket Water Elbow and Adapter are Now Used on Certain Cat® Engines {1355, 1380, 1393}
Documentation Required for Diesel Exhaust Fluid (DEF) Injector Failures on Certain 3500 and C175 Machine Engines {108H, 108K, 108Z, 1091} Documentation Required for Diesel Exhaust Fluid (DEF) Injector Failures on Certain 3500 and C175 Machine Engines {108H, 108K, 108Z, 1091}
C27 and C32 Generator Set Engines Cylinder Head - Remove
New Engine and Aftertreatment Software are Now Available for Certain 797F Off-Highway Truck Engines {1920, 7620} New Engine and Aftertreatment Software are Now Available for Certain 797F Off-Highway Truck Engines {1920, 7620}
New Firmware is Available for Certain Power Modules {7610} New Firmware is Available for Certain Power Modules {7610}
Perform Circuit Breaker Inspection on Certain Cat® Engines {1420} Perform Circuit Breaker Inspection on Certain Cat® Engines {1420}
Charging System Troubleshooting Guide Has Been Updated for All Machines {1406, 7569} Charging System Troubleshooting Guide Has Been Updated for All Machines {1406, 7569}
Charging System Troubleshooting Guide Has Been Updated for All Engines {1406, 7569} Charging System Troubleshooting Guide Has Been Updated for All Engines {1406, 7569}
New Special Instruction to Interpret Scheduled Oil Sampling (SOS) is Now Available for All C27 and C32 Machine Engines {1000, 7571} New Special Instruction to Interpret Scheduled Oil Sampling (SOS) is Now Available for All C27 and C32 Machine Engines {1000, 7571}
New Stainless Steel Aftercooler Core is Now Available for Certain G3520H Generator Sets {1063} New Stainless Steel Aftercooler Core is Now Available for Certain G3520H Generator Sets {1063}
325 Excavator Cooling System Coolant Extender (ELC) - Add
325 Excavator Cooling System Coolant Level - Check
325 Excavator Cooling System Coolant Sample (Level 1) - Obtain
325 Excavator DEF Filler Screen - Clean
325 Excavator DEF Manifold Filters - Replace
325 Excavator Diesel Exhaust Fluid - Drain
325 Excavator Diesel Exhaust Fluid Filter - Replace - C7.1 Engine
325 Excavator Engine Air Filter Primary and/or Secondary Element - Replace
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.