New Seal Installer for Certain Reman Sea Water Pumps is Now Available on Certain C18 Marine Engines {1371} Caterpillar

Engine

C18 (S/N: TNA1-248; GTB1-144; T2R1-224; GEX1-182)

Generator Set

C18 MARINE GS (S/N: GBM1-1449; CYN1-789; GEN1-284; MGS1-921)

Marine Engine

3406E MARINE (S/N: 9WR1-10673)

C18 MARINE (S/N: WKB1-434; C1J1-1135; JHL1-232; DTP1-163; GES1-1273)

C18 MARINE ENG (S/N: T2P1-5238)

The new seal installer provides a tighter seal to help prevent water leaks.

The following changes are now available for the products within the listed serial numbers.

Note: The new seal installer is only available for reman sea water pumps with a drive-end body bore depth of 13.12 mm (0.517 inch).

For correct use of the new seal installer refer to the publications below.

Reference: Disassembly and Assembly, UENR0179, "Auxiliary Water Pump - Disassembly - Type 2"

Reference: Disassembly and Assembly, UENR0179, "Auxiliary Water Pump - Assembly - Type 2"

Table 1 contains the new and previous part numbers for this change.