1986/05/01 Caterpillar


Three Element Speed Switch Replaces Dual Element Speed Switch

Usage:


All Industrial, Marine, And Generator Set Engines Except 3500 Series

Description of Change: A new three element switch assembly is used in place of the former dual element switch assembly on all engine applications except 3500 Series Engines. The new switch has the following improvements:

... Three elements, instead of two, are used.
... There are four extra mounting holes.
... "Overspeed" does not show if the magnetic pickup is disconnected.
... The "crank terminate" contacts (terminals 10, 11, 12) remain actuated for two seconds after the engine stops.
... The switch is less affected by electrical noise, excessive voltage, and voltage spikes.

Adaptable To: The new 7W2743 Switch Assembly can be used as a replacement for the former 5N8947 Switch Assembly which is canceled. Special Instruction SEHS8486 covers the installation of the new switch (terminals 2 through 12 have same function as on former switch).

Caterpillar Information System:

1986/05/01 Silicone Rubber Hoses Available For Engine Oil Cooler Water Lines
1986/05/01 New Wire Assemblies And Spark Plug Insulators Improve Service Life Of Ignition System
1986/05/01 Cylinder Liner Seat Insert Available
1986/05/01 Be Sure The Polarity Of The Electrical Connector On EG3P Woodward Actuator Assembly Is Correct
1986/05/01 New Alternators Are Self-Energizing And Have Built-In Regulators
1986/04/01 Remanufactured Short Block Available For 3204 Industrial Engines
1986/04/01 New Index Lists Engine Special Instructions By SMCS Code
1986/04/01 New Bracket Used In Air Compressor Lines Group
1986/04/01 Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle
1986/04/01 Adjust Bridge Whenever Valve Clearance Adjustments Are Made
1986/04/01 Fuel Injection Timing Changed To 15° With New 3.5° Timing Advance
1986/04/01 Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control
1986/05/01 New Conversion Groups Available To Convert From Hydramechanical Governors To Woodward PSG Governors
1986/05/01 New Tool Available To Measure Propeller Pitch
1986/05/01 FT Tooling Prints Available For Bushing Installation In Governor Housing
1986/05/01 Fittings Added To Jacket Water Heater Hose To Prevent Interference With Folded Core Radiator
1986/05/01 List of Service Publications
1986/06/01 Determining The Cause Of Glow Plug Tip Failures
1986/06/01 Service Reminders For 3400 Family Of Diesel Engines
1986/06/01 New Service Tools Available
1986/06/01 Be Sure The Correct Sending Units Are Used With Oil Pressure And Water Temperature Gauges In Control Panels
1986/06/01 Optional Load Sharing Electric Governor Changed From 2301 to 2301A Woodward Governor
1986/06/01 Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers
1986/06/01 Top Shaft Wear Sleeve For 7241 Marine Transmissions Can Be Used On 7231 Marine Transmissions
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.