1986/05/01 Caterpillar


FT Tooling Prints Available For Bushing Installation In Governor Housing

Usage:


3406B Engines

Prints of the FT1949 Reamer, FT1950 Fixture Assembly and FT1951 Bushing are available. These tools are used to install an 8N3945 Bushing in the 8N9679 Governor Housing on 3406B Engines. Special Instruction, Form SEHS8585, provides additional information about installing the bushing in the governor housing.

Dealers in the NACD, COSA and Caterpillar Americas can order drawings of Fabricated Tools (FT) from the address that follows. All other dealers can order drawings from their Subsidiary Service Department.

Caterpillar Tractor Co.
AD180 Publications Print Room
600 W. Washington Street
East Peoria, IL 61630-0371 (U.S.A.)
Phone: 309-675-7292
Telex: 710-822-0198

Caterpillar Information System:

1986/05/01 New Tool Available To Measure Propeller Pitch
1986/05/01 New Conversion Groups Available To Convert From Hydramechanical Governors To Woodward PSG Governors
1986/05/01 Three Element Speed Switch Replaces Dual Element Speed Switch
1986/05/01 Silicone Rubber Hoses Available For Engine Oil Cooler Water Lines
1986/05/01 New Wire Assemblies And Spark Plug Insulators Improve Service Life Of Ignition System
1986/05/01 Cylinder Liner Seat Insert Available
1986/05/01 Be Sure The Polarity Of The Electrical Connector On EG3P Woodward Actuator Assembly Is Correct
1986/05/01 New Alternators Are Self-Energizing And Have Built-In Regulators
1986/04/01 Remanufactured Short Block Available For 3204 Industrial Engines
1986/04/01 New Index Lists Engine Special Instructions By SMCS Code
1986/04/01 New Bracket Used In Air Compressor Lines Group
1986/04/01 Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle
1986/05/01 Fittings Added To Jacket Water Heater Hose To Prevent Interference With Folded Core Radiator
1986/05/01 List of Service Publications
1986/06/01 Determining The Cause Of Glow Plug Tip Failures
1986/06/01 Service Reminders For 3400 Family Of Diesel Engines
1986/06/01 New Service Tools Available
1986/06/01 Be Sure The Correct Sending Units Are Used With Oil Pressure And Water Temperature Gauges In Control Panels
1986/06/01 Optional Load Sharing Electric Governor Changed From 2301 to 2301A Woodward Governor
1986/06/01 Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers
1986/06/01 Top Shaft Wear Sleeve For 7241 Marine Transmissions Can Be Used On 7231 Marine Transmissions
1986/06/01 New 8T5334 Surface Temperature Thermocouple Probe Available
1986/06/01 Three Types Of Maintenance Management Publications Available For Engines
1986/06/01 Identification Of Crankshafts For Marine Society Approval
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.