336, 336 GC and 340 Excavator Systems Caterpillar


Suction Fan

Usage:

336 DKS


Illustration 1g06289782
Typical example

Table 1
Item  Qty  Part  Specification Description 
12  8T-4908 Bolt  Torque to 15 ± 3 N·m (133 ± 27 lb in)
8T-4189 Bolt  Torque to 15 ± 3 N·m (133 ± 27 lb in)
8T-4196 Bolt  Torque to 30 ± 7 N·m (266 ± 62 lb in)
10  8T-4908 Bolt  Torque to 15 ± 3 N·m (133 ± 27 lb in)


Illustration 2g06289791
Detailed view of area A

Table 2
Item  Qty  Part  Specification Description 
8T-4184 Bolt  Torque to 100 ± 20 N·m (74 ± 15 lb ft)
8T-4648 Bolt  Torque to 100 ± 20 N·m (74 ± 15 lb ft)

Caterpillar Information System:

336, 336 GC and 340 Excavator Systems Position Sensor and Mounting
301.5, 301.6, 301.7CR, 301.8, 302CR Mini Hydraulic Excavators Machine System Stick
336, 336 GC and 340 Excavator Systems Manifold and Reducing Valve (Pilot Oil)
336, 336 GC and 340 Excavator Systems Swing Gear and Bearing
336 and 336 GC Excavator Fuel Tank Water and Sediment - Drain
336 and 336 GC Excavator Engine Air Filter Primary and/or Secondary Element - Replace
Regulatory Compliance Information Radio Detection and Ranging (Radar) - C5 Radar - If Equipped
336 and 336 GC Excavator Parking
797 Transmission Planet Shaft Plug Removal, Clean Planet Shaft Lube Passages and Install New Plug Procedures {0599, 0700, 0722, 3160} 797 Transmission Planet Shaft Plug Removal, Clean Planet Shaft Lube Passages and Install New Plug Procedures {0599, 0700, 0722, 3160}
301.5, 301.6, 301.7 CR, 301.8, and 302 CR Mini Hydraulic Excavator Machine System Control Valve (Boom Lowering)
Thermocouples May Fail on Certain G3500 Engines {7498} Thermocouples May Fail on Certain G3500 Engines {7498}
301.5, 301.6, 301.7 CR, 301.8, and 302 CR Mini Hydraulic Excavator Machine System General Information (Boom System)
336, 336 GC and 340 Excavator Systems Front Lines
336, 336 GC and 340 Excavator Systems Fuel Tank and Mounting
336, 336 GC and 340 Excavator Systems Fuel Tank
336, 336 GC and 340 Excavator Systems Track Adjuster and Recoil
336, 336 GC and 340 Excavator Systems Pump Lines
Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553} Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553}
336 and 336 GC Excavator Swing Drive Oil - Change
301.5, 301.6, 301.7 CR, 301.8, and 302 CR Mini Hydraulic Excavator Machine System Boom Cylinder
336 and 336 GC Excavator Swing Drive Oil Level - Check
336, 336 GC and 340 Excavator Systems Hydraulic Oil Cooler Lines Group
336 and 336 GC Excavator Swing Drive Oil Sample - Obtain
336, 336 GC and 340 Excavator Systems Hydraulic Oil Cooler Lines Group
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.