Track Adjuster and Recoil
Show/hide table
Illustration 1 | g06021372 |
Show/hide table
Item | Qty | Part | Specification Description |
1 | 1 | Use any one of the following springs: | |
528-7395 Spring | Length under test force is Test force is Free length after test is |
||
528-7396 Spring | Length under test force is Test force is Free length after test is |
||
2 | 1 | 509-2009 Spacer | Install the spacer with the direction of chamfer, as shown. |
3 | 1 | 496-2994 Nut | Before assembly, apply coat of 1U-8801 Rust Preventive Oil to the threads. |
4 | 2 | 8T-9080 Bolt | Apply blue Loctite 243 to the threads. |
A | - | - | Assembled Length |
Caterpillar Information System:
336, 336 GC and 340 Excavator Systems Fuel Tank
336, 336 GC and 340 Excavator Systems Fuel Tank and Mounting
336, 336 GC and 340 Excavator Systems Front Lines
336, 336 GC and 340 Excavator Systems Suction Fan
336, 336 GC and 340 Excavator Systems Position Sensor and Mounting
301.5, 301.6, 301.7CR, 301.8, 302CR Mini Hydraulic Excavators Machine System Stick
336, 336 GC and 340 Excavator Systems Manifold and Reducing Valve (Pilot Oil)
336, 336 GC and 340 Excavator Systems Swing Gear and Bearing
336 and 336 GC Excavator Fuel Tank Water and Sediment - Drain
336 and 336 GC Excavator Engine Air Filter Primary and/or Secondary Element - Replace
Regulatory Compliance Information Radio Detection and Ranging (Radar) - C5 Radar - If Equipped
336 and 336 GC Excavator Parking
336, 336 GC and 340 Excavator Systems Pump Lines
Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553} Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553}
336 and 336 GC Excavator Swing Drive Oil - Change
301.5, 301.6, 301.7 CR, 301.8, and 302 CR Mini Hydraulic Excavator Machine System Boom Cylinder
336 and 336 GC Excavator Swing Drive Oil Level - Check
336, 336 GC and 340 Excavator Systems Hydraulic Oil Cooler Lines Group
336 and 336 GC Excavator Swing Drive Oil Sample - Obtain
336, 336 GC and 340 Excavator Systems Hydraulic Oil Cooler Lines Group
336 Excavators (Powered by C9.3 Tier 4 Engine) Engine Supplement DEF Injector and Mounting - Remove and Install
301.5, 301.6, 301.7 CR, 301.8, and 302 CR Mini Hydraulic Excavator Machine System Boom Cylinder - Swing Boom
301.5, 301.6, 301.7 CR, 301.8, and 302 CR Mini Hydraulic Excavator Machine System General Information (Stick System)
301.5, 301.6, 301.7 CR, 301.8, and 302 CR Mini Hydraulic Excavator Machine System Control Valve (Stick Lowering)