Turbocharger
Show/hide table
| |
| Illustration 1 | g03532197 |
|
Typical example | |
Show/hide table
| Item | Qty | Part | Specification Description |
| 1 | 1 | 239-5858 Compressor Clamp Assembly | Torque to |
| 2 | 4 | 9X-6620 Locknut | Before assembly, lubricate the threads and bearing surfaces with Loctite C5A copper anti-seize.
Torque to |
| 3 | 1 | 1W-9311 Turbine Clamp As | Use the following procedure to tighten the turbine clamp assembly:
(1.) Tighten the band clamp to (2.) Loosen the band clamp by one to two turns. (3.) Again, tighten the band clamp to |
Caterpillar Information System:
3412C Generator Set Generator Operation
3412C Generator Sets Generator Lead Connections
C11 and C13 Engines Engine Oil Filter
New Monitor Software is Now Available for Certain Cat® Products {1901, 7490, 7610, 7620} New Monitor Software is Now Available for Certain Cat® Products {1901, 7490, 7610, 7620}
301.5, 301.6, 301.7 CR, 301.8 and 302 CR Mini Hydraulic Excavators Storage and Literature Compartment
G3516 TA Engine Exhaust Manifold
3412C Generator Sets Product Description
C9.3B Engine Event Codes
PM820, PM822, and PM825 Cold Planer Machine Systems Hydraulic Cylinder (Elevation) - Assemble
PM820, PM822, and PM825 Cold Planer Machine Systems Hydraulic Cylinder (Elevation) - Disassemble
Procedure to Install and Operate Diesel Exhaust Fluid Transfer Pump on Certain Cat® Engines {108H, 108J, 108K} Procedure to Install and Operate Diesel Exhaust Fluid Transfer Pump on Certain Cat® Engines {108H, 108J, 108K}
301.5, 301.6, 301.7 CR, 301.8 and 302 CR Mini Hydraulic Excavators Window (Front)
C7.1 Marine Propulsion Engine Fuel Injection Pump - Remove and Install
301.5, 301.6, 301.7 CR, 301.8 and 302 CR Mini Hydraulic Excavators Work Tool Control
A New Limit Switch is Now Available for Certain C280 Engines {1408, 1435} A New Limit Switch is Now Available for Certain C280 Engines {1408, 1435}
3412C Generator Set Voltage Connections
The Temperature Variable Control May Fail on Certain 773G, 775G, and 777G Off-Highway Trucks {7309, 7343} The Temperature Variable Control May Fail on Certain 773G, 775G, and 777G Off-Highway Trucks {7309, 7343}
C7.1 Marine Propulsion Engine Fuel Injection Pump Gear - Remove
C7.1 Marine Propulsion Engine Fuel Injection Pump Gear - Install
C175 Tier 4 Final Engines for Off-Highway Trucks Crankcase Pressure Is High
797F Off-Highway Truck Engine Oil - Change
C7.1 Marine Propulsion Engine Water Pump - Remove and Install
301.5, 301.6, 301.7 CR, 301.8 and 302 CR Mini Hydraulic Excavators Maintenance Interval Schedule
C7.1 Marine Propulsion Engine Water Temperature Regulator - Remove and Install