Fuel Injection Pump Gear - Install
Reference: Special Instruction, "Visual Service Procedures - Colors and Symbols" M0066576.
Show/hide table
| Required Tools | |||
| Tool | Part Number | Part Description | Qty |
| B | - | E10 Torx Socket 1/4" Square Drive |
1 |
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Ensure that the fuel injection pump gear is clean and free from wear of damage. If necessary, replace the fuel pump gear. Ensure that the shaft for the fuel injection pump is clean and free from wear or damage.
Show/hide table
| |
| Illustration 1 | g06267704 |
Show/hide table
| |
| Illustration 2 | g06267705 |
Show/hide table
| |
| Illustration 3 | g06267706 |
Show/hide table
| |
| Illustration 4 | g06267707 |
|
Use a suitable tool to prevent the fuel injection pump gear from rotating. | |
Note: Do not use timing pin for the fuel injection to prevent the fuel injection pump gear from rotating.
End By:
- Install the fuel injection pump.
Caterpillar Information System:
C7.1 Marine Propulsion Engine Fuel Injection Pump Gear - Remove
The Temperature Variable Control May Fail on Certain 773G, 775G, and 777G Off-Highway Trucks {7309, 7343} The Temperature Variable Control May Fail on Certain 773G, 775G, and 777G Off-Highway Trucks {7309, 7343}
3412C Generator Set Voltage Connections
A New Limit Switch is Now Available for Certain C280 Engines {1408, 1435} A New Limit Switch is Now Available for Certain C280 Engines {1408, 1435}
301.5, 301.6, 301.7 CR, 301.8 and 302 CR Mini Hydraulic Excavators Work Tool Control
C7.1 Marine Propulsion Engine Fuel Injection Pump - Remove and Install
C11 and C13 Engines Turbocharger
3412C Generator Set Generator Operation
3412C Generator Sets Generator Lead Connections
C11 and C13 Engines Engine Oil Filter
New Monitor Software is Now Available for Certain Cat® Products {1901, 7490, 7610, 7620} New Monitor Software is Now Available for Certain Cat® Products {1901, 7490, 7610, 7620}
301.5, 301.6, 301.7 CR, 301.8 and 302 CR Mini Hydraulic Excavators Storage and Literature Compartment
C175 Tier 4 Final Engines for Off-Highway Trucks Crankcase Pressure Is High
797F Off-Highway Truck Engine Oil - Change
C7.1 Marine Propulsion Engine Water Pump - Remove and Install
301.5, 301.6, 301.7 CR, 301.8 and 302 CR Mini Hydraulic Excavators Maintenance Interval Schedule
C7.1 Marine Propulsion Engine Water Temperature Regulator - Remove and Install
301.5, 301.6, 301.7 CR, 301.8 and 302 CR Mini Hydraulic Excavators Adjustable Gauge Undercarriage Frame
301.5, 301.6, 301.7 CR, 301.8 and 302 CR Mini Hydraulic Excavators Lifting and Tying Down the Machine
301.5, 301.6, 301.7 CR, 301.8 and 302 CR Mini Hydraulic Excavators Access Door and Cover Locations
3412C Generator Set Fuel System Secondary Filter - Replace
C7.1 Marine Propulsion Engine Vibration Damper and Pulley - Remove and Install
3412C Generator Sets Refill Capacities
3412C Generator Sets Fluid Recommendations